04-05-2013 08:11 PM - edited 03-18-2019 12:53 AM
Hi all,
I'm using Multisite feature on SX20 for 3-site conference. Now I'd like to add some Webex sites into this conference. So which additional devices do I need?
Thanks in advance.
04-06-2013 03:34 AM
Hi Tien,
Unfortunately, Cisco Tandberg Devices doesn't allow Webex Users to be a part of Video Conferencing.
For using webex with Cisco Telepresence, you would need to have CUCM, CTMS along with Webex Site procured for your company.
Let me know if you have any other queries.
Thanks,
Saurabh
04-06-2013 10:07 AM
This will be possible in the near future. As far as I know, you'll need a TelePresence MCU, a VCS-C, and a VCS-E. There are also some requirements to the WebEx sites' software versions.
Regards,
Kjetil
Sent from Cisco Technical Support iPad App
04-08-2013 07:40 PM
How about Cisco Telepresence Manager?
As I see in datasheet, this integration can be done.
04-09-2013 02:00 AM
Hi Tien,
Yes, It Works with CTS- Manager provided you have the infrastructure to support it.
You would need CUCM in place of VCS
CTMS in place of MCU.
and CTS-Manager in place of TMS which can be integrated with Webex.
And the Endpoints should be able to get registered on the CUCM.
Also, you should have proper licenses available on the Webex Side and information to have smooth integration of Webex With CTS-Manager.
Thanks,
Saurabh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide