TelePresence and Video Infrastructure

Hello,One of our customers have an MCU5320 and it is registered with the CUCM as SIP. Also they have a VCS Control + VCS Expressway for internet calling. Now the customer is planning to buy Cisco TMS to manage systems and to schedule conferences. I a...

HiI have Cisco C40 connected to CUCM 8.6.2.First time it is registered with CUCM and I was able to make call to C40 from other phone.Then, C40 automatically unregisterd from CUCM and it is not registering with CUCM now.I have added C40 via, Device->P...

Hi, I have a VCS control version 7.2 integrate with CUCM 8.6 via SIP trunk.The VC endpoint can call IP phones and vice versa.I have configured a search rule (9\d{8}) (9+ followed by 8 digits) in VCS to allow VC endpoint to call PSTN via CUCM.But some...

Hello,     We recentely aquired a CTS-1300 and we need to register the cts to the VCS as a gatekeeper, we are running the CTS software 1.6 and VCS 7.1, is it possible?     Right now we dont want to register into our call manager, we really need to us...

Hi,Is there anyway of updating the SNMP on codian / tandberg products? I believe as stardard these are SNMP v1, can they be updated to SNMP v3?Any assistance is greatly appreciated.GK

Hello All,I am attempting to upgrade a VCS control from 6.0 to 6.1 but each time about halfway through the process I receive the message "release key invalid" and the process stops.  I have tried leaving the release key field blank at the start of th...

Cisco,Anyone from Cisco care to comment and or explain this for me?"We have VCS Express v7.2.1 that according to the release notes supports “TLS 1.1 and 1.2 have been enabled in Apache” which means the device supports strong Ciphers. However, per a V...

Hi all,Do anyone else have a failed tan test indication on the main page of web interface on a C20 codec, freshly upgraded from TC5 to TC6.0.1 ?I mean on the System Information page / General tab, the Fans report 1 or 2 failed test(s) on one or both ...