04-26-2014 01:44 PM - edited 03-18-2019 02:55 AM
Hi Friends,
I have registered MCU 5310 to CUCM 10.x as conference bridge and I have added this MCU under MRG and MRGL deployed in device pool also. I have registered three quantities of SX20 to callmanager. One to one video call is working fine. But when i add a 3rd SX20 to the conference call, only the first two calls are receiving the video and the third call is having only the audio. Conferencing is happening but only the first two calls are receiving the video of first 2 endpoints and not the third one.
Could you please reply me how we can resolve this issue.
Regards,
Thirruselvaa
05-15-2014 01:10 AM
Hi Friends,
We have resolved the issue. We have provided the option in both endpoint[SX20] and also in CUCM-phone page to use "CUCMMediaResourceGroupList" and it resolved the issue.
Regards,
Thirruselvaa
07-31-2015 01:03 PM
HI,
I have done exactly as you specified, "We have provided the option in both endpoint[SX20] and also in CUCM-phone page to use "CUCMMediaResourceGroupList", but my sx20 still does not use the MCU for conference.
Any help?
08-06-2015 02:57 AM
Need detailed configuration guide for integrating MCU with CUCM for scheduled conferences + TMS how to integrate TMS then in to the same for VC scheduling.
08-10-2015 08:41 PM
Hi Ateeq,
Check out the Cisco TelePresence MCU Deployment Guide.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
08-10-2015 10:07 PM
Update,
I finally figured out that you cannot merge calls from the UI. For the SX to use an external resource, you must add all calls using either the touchpad or remote
--Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide