12-21-2017 03:24 AM - edited 03-18-2019 01:42 PM
Hi,
I would like to know the infrastructure requirements for the Cisco Spark range, including Spark Room Kits, Room 55 and also Room 70?
I know there will be upgrades needed to TMS and CUCM, but are there any other infrastructure changes needed to VCS, etc?
Many Thanks.
Solved! Go to Solution.
12-21-2017 04:08 AM
For VCS, the spark room kits register natively.
Due to CUCM upgrade requirements we currently run them on our VCSC..X8.7
Call Control |
● Cisco Unified Communications Manager (CUCM)
◦ Native registration with CUCM
◦ Requires CUCM Version 9.1(2) or later with device pack Room Kit
● Cisco Video Communication Server (VCS)
◦ Native registration with VCS
● Cisco Spark Service
● Third-party H.323 Gatekeepers and standards-based SIP proxies
|
12-26-2017 12:33 AM
12-21-2017 04:08 AM
For VCS, the spark room kits register natively.
Due to CUCM upgrade requirements we currently run them on our VCSC..X8.7
Call Control |
● Cisco Unified Communications Manager (CUCM)
◦ Native registration with CUCM
◦ Requires CUCM Version 9.1(2) or later with device pack Room Kit
● Cisco Video Communication Server (VCS)
◦ Native registration with VCS
● Cisco Spark Service
● Third-party H.323 Gatekeepers and standards-based SIP proxies
|
12-26-2017 12:33 AM
09-23-2018 07:37 AM
Hi All
Which fw port need to be open spark room kit for CUCM registration ?
I could not any fw port information anywhere :
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide