01-26-2013 09:42 PM - edited 03-18-2019 12:30 AM
Hi all:
I have a problem.My C60 Codec can dial to Lync client,but without video,only audio.
Form the call history,I can see the call status is 200/OK
Could you anyone who can give me some approach to work this issue out.
Any help or suggestion will be apprecated.
01-29-2013 12:05 AM
Hello,
Please check B2BUA and neighbor zone status. Read following document and go through all steps:
- B2BUA, pages 34-39
- Lync Server configuration, pages 31-33
01-29-2013 02:24 AM
Is the B2BUA a must option, if deploye the intergration of VCS and Lync.
01-29-2013 09:02 AM
For VCS X5.x, X6.x and X7.x can be used non-B2BUA mode (OCS Relay)
For VCS X7.0 or later can be used B2BUA mode
Please be aware
Features and capabilities with different versions of software
The versions of software (Cisco VCS X4, X5, X6, X7 and OCS R2, Lync 2010 / standard, enterprise) affect the capabilities of the deployed system.
- Cisco VCS can interoperate with both OCS 2007 R2 Standard and Enterprise edition.
- Version X6.1 or later is required to support Lync Standard edition and Lync Enterprise edition.
- Version X7.0 or later is required to support VCS B2BUA
- Beyond X7.x it is expected that OCS Relay will no longer be available
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide