09-05-2017 09:51 PM - edited 03-19-2019 12:46 PM
Hi, all.
I have upgraded CUCM from 11.5.1(SU1) to 11.5.1(SU3).
After upgraded, I can't synchronize CUCM 11.5 SU3 and standalone PLM 11.5.
PLM says 'Application Error' for reason that is not synchronized CUCM.
I could synchronize CUCM 11.5 SU1 and PLM. I don't configure mixed mode on CUCM.
I tried remove CUCM from PLM and reconfigure, but I couldn't synchronize them.
I don't have any idea to synchronize them.
Does someone have any good ideas?
Thank you for reading and your kindness.
09-05-2017 10:01 PM
Hi,
these bugs could be the issue :
09-05-2017 10:20 PM
Hi, Aman!
Thank you for replying.
I read the detail of CSCur95552.
I think CUCM 11.5 SU3 does not met the Bug.
Do you know whether CUCM 11.5 SU3 is affected?
Thank you.
09-05-2017 10:24 PM
Hi Ban,
I am not aware of any other bug related to your issue in 11.x version.
regds,
aman
09-07-2017 02:09 PM
I had the same issue. Upgrade your PLM to the newest version, 11.5.1 (SU2) and it'll work for sure. Worked for me.
09-11-2017 10:24 PM
Hi, Slavik
I upgraded my PLM, but it did not work. It says "Application Error"...
My CUCM cluster is in lab, so I reconfigured my CUCM cluster and old cluster was deleted.
Then, they synchronize!
Thank you for your kindness.
09-13-2018 04:02 AM
Upgrade worked.
The latest 11.5 CUCM 11.5.1.15900-18 with the latest PLM 11.5.1.15900-3 - no application error.
05-15-2018 03:03 AM
@Slavik Bialik +5 for your suggested solution.
I have CUCM 11.5 SU4 and Upgrade of PLM to the 11.5.1 (SU2) could solved my issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide