06-05-2008 06:44 AM - edited 03-18-2019 09:03 PM
Does anyone know if CM 6.1 is compatible with Unity 4.0 Build 4.0(4)?, I have been looking for the compatibility matrix and cannot locate one on Cisco's site addressing this question.
Thanks.
Solved! Go to Solution.
06-05-2008 06:51 AM
just make sure you have the right TSP
SCCP Compatibility Matrix: Cisco Unity, the Cisco Unity-CM TSP, Cisco Unified CM, and Cisco Unified CM Express
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
HTH
javalenc
if this helps, please rate
06-05-2008 06:54 AM
Yes, Unity 4.0(4) is supported with CM 6.1. Take a look at the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
Hope this helps. If so, please rate the post.
Brandon
06-05-2008 06:51 AM
just make sure you have the right TSP
SCCP Compatibility Matrix: Cisco Unity, the Cisco Unity-CM TSP, Cisco Unified CM, and Cisco Unified CM Express
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
HTH
javalenc
if this helps, please rate
06-05-2008 06:57 AM
Thanks considerably for the quick response.
06-05-2008 06:54 AM
Yes, Unity 4.0(4) is supported with CM 6.1. Take a look at the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
Hope this helps. If so, please rate the post.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide