12-09-2009 08:50 AM - last edited on 03-25-2019 09:32 PM by ciscomoderator
Hi friends,
I'm configuring a CME in order to use ASA phone proxy and I am not finding any guides to configure, does any one could help me ?
12-10-2009 10:09 AM
Hi!
I believe this is what you are looking for:
https://www.myciscocommunity.com/docs/DOC-10763
The document provides a step-by-step configuration guide for setting up Cisco ASA Phone Proxy& CME.
HTH,
Regards,
Teresa.
If it helps, please rate
04-03-2012 01:59 PM
hI Teresa
Do you have a working link for this setup
Thanks
shameer
04-03-2012 02:46 PM
Hi Mohamed,
I see the document was deleted, which is weird. Please provide your CCO id and mail and let me see if I can get this doc for you.
Regards,
Tere.
04-03-2012 03:13 PM
Hi Teresa
Thank for your reply.
I'm trying to accomplish this remote SSL ipphone with ASA & CME but getting authentication error as soon as I entered user/pass on ipphone VPN config. SSL web Vpn is working fine from the PC. But not authenticating on ipphone for some reason.
So need a proper document for troubleshooting.
My Cisco id - sharose123
Email - shameer.fareed@unificomms.com
Thanks for your help
Shameer
Sent from my HTC
04-08-2012 09:21 PM
Hi
What firmware you are using. Minimum firmware n phone should be 9.0 or later.
Also what Phone you are using.
Other requirement and configuration example are given in below link
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevpn.html
Regards
Ronak patel
Plese rate helpful posts.
04-09-2012 05:15 AM
Hi Tere/Patel
Thank you very much for your support
I've managed to fix it.
It's working fine.
Regards
shameer
12-07-2018 10:58 PM
Hello Teresa, would you be able to share the document with me to set up a vpn phone. Thanks...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide