02-04-2021 02:56 AM
Our company is planning to use SIP trunk, what license do we need to purchase.
Solved! Go to Solution.
02-04-2021 03:03 AM
Its recommend to contact a local Cisco partner or Cisco SE.
The CUBE features described above are licensed to enable three principal use models:
● Trunking for service interconnect and protocol interworking. Trunk licenses are available for both standard (single node) and redundant (high-availability pair) network architectures to facilitate site-to-site and PSTN connectivity. Each trunk license enables a single call session in addition to a single forked media session for recording where required.
● Lineside to enhance the delivery of hosted SIP communications services. Previously only available for the Cisco 800 Series Routers through the NanoCUBE license, CUBE Lineside client licenses are now available for all platforms listed in Table 2. Each Lineside license enables registration proxy and survivability features for one local SIP endpoint.
● Media Proxy for advanced call recording and compliance solutions. Deployed independently from CUBE platforms configured for trunkside or lineside applications, CUBE Media Proxy allows corporate customers to meet compliance requirements by simultaneously recording or analyzing calls at up to five destinations simultaneously. Each Media Proxy license enables one forked media session in either standard or redundant configurations.
Have a look on below link.
02-04-2021 06:44 AM
Your CUBE version will also determine what are your options for licensing, if you're on the latest and greatest you will need Smart Licensing configured before you even think of buying the licenses. The Cisco Partner or your SE should be able to guide you on this.
02-04-2021 08:04 PM
02-04-2021 03:03 AM
Its recommend to contact a local Cisco partner or Cisco SE.
The CUBE features described above are licensed to enable three principal use models:
● Trunking for service interconnect and protocol interworking. Trunk licenses are available for both standard (single node) and redundant (high-availability pair) network architectures to facilitate site-to-site and PSTN connectivity. Each trunk license enables a single call session in addition to a single forked media session for recording where required.
● Lineside to enhance the delivery of hosted SIP communications services. Previously only available for the Cisco 800 Series Routers through the NanoCUBE license, CUBE Lineside client licenses are now available for all platforms listed in Table 2. Each Lineside license enables registration proxy and survivability features for one local SIP endpoint.
● Media Proxy for advanced call recording and compliance solutions. Deployed independently from CUBE platforms configured for trunkside or lineside applications, CUBE Media Proxy allows corporate customers to meet compliance requirements by simultaneously recording or analyzing calls at up to five destinations simultaneously. Each Media Proxy license enables one forked media session in either standard or redundant configurations.
Have a look on below link.
02-04-2021 06:44 AM
Your CUBE version will also determine what are your options for licensing, if you're on the latest and greatest you will need Smart Licensing configured before you even think of buying the licenses. The Cisco Partner or your SE should be able to guide you on this.
02-04-2021 07:49 PM - edited 02-04-2021 07:49 PM
We wish to replace our existing 29XX as i see its going to end of life soon. 4XXX will be sufficient ?.
02-04-2021 08:04 PM
ISR 4XXX is the replacement for 29XX. That will be sufficient.
02-05-2021 06:56 AM
Hi there
As @Nithin Eluvathingal suggested. 29XX replacement is ISR4K. But compare and select the different ISR4K to meet your needs
Hope this Helps
Cheers
Rath!
***Please rate helpful posts and if applicable mark "Accept as a Solution"***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide