04-19-2016 02:06 PM - edited 03-19-2019 11:00 AM
Hello Experts ;
I am getting below error while installing CM subscriber .NTP IS OK , I make router to resolve Publisher name since no dns server,but i dont know why i am getting this error.
Solved! Go to Solution.
04-19-2016 03:16 PM
Try disabling the LRO option in the ESXi host configuration followed by ESXi host reboot. refer below doc for the same.
https://supportforums.cisco.com/document/95886/disable-lro-ucs-uc-application-deployments
http://docwiki.cisco.com/wiki/Disable_LRO
Also refer the below Bug: CSCur94973 and Contact Cisco TAC if disabling the LRO doesn't help.
Symptom:
Upgrade times out with the error:
Command "/opt/cisco/install/bin/pmNormalizeGeneric /etc/opt/cisco/install/component_install_cmd_list" has exceeded timed threshold of 3600 seconds
Conditions:
Migration from 6.1(5)/7.x/8.x/9.x/10.0(1)/10.5(1) to 10.5(2)
Workaround:
Disable the VM's ntp sync with the ESXi host using the workaround mentioned in the below link:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1189
Alternate workaround would be to configure ESXi server & CUCM publisher to point to same NTP server.
Further Problem Description:
Due to the symptoms, we see upgrade failures.
https://supportforums.cisco.com/discussion/12879341/installation-cuc-110120000-2-failed
https://supportforums.cisco.com/discussion/12386081/installation-fails-cucm-subscriber-105-exceeds-3600-seconds-limit
https://supportforums.cisco.com/discussion/11267446/install-cucm-86110000-43-vmware-fails-installing-progmeter
04-19-2016 03:16 PM
Try disabling the LRO option in the ESXi host configuration followed by ESXi host reboot. refer below doc for the same.
https://supportforums.cisco.com/document/95886/disable-lro-ucs-uc-application-deployments
http://docwiki.cisco.com/wiki/Disable_LRO
Also refer the below Bug: CSCur94973 and Contact Cisco TAC if disabling the LRO doesn't help.
Symptom:
Upgrade times out with the error:
Command "/opt/cisco/install/bin/pmNormalizeGeneric /etc/opt/cisco/install/component_install_cmd_list" has exceeded timed threshold of 3600 seconds
Conditions:
Migration from 6.1(5)/7.x/8.x/9.x/10.0(1)/10.5(1) to 10.5(2)
Workaround:
Disable the VM's ntp sync with the ESXi host using the workaround mentioned in the below link:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1189
Alternate workaround would be to configure ESXi server & CUCM publisher to point to same NTP server.
Further Problem Description:
Due to the symptoms, we see upgrade failures.
https://supportforums.cisco.com/discussion/12879341/installation-cuc-110120000-2-failed
https://supportforums.cisco.com/discussion/12386081/installation-fails-cucm-subscriber-105-exceeds-3600-seconds-limit
https://supportforums.cisco.com/discussion/11267446/install-cucm-86110000-43-vmware-fails-installing-progmeter
04-19-2016 09:54 PM
Simply disable the LRO settings followed by the ESXi reboot and that should be good enough to take care of this issue.
Regards
Deepak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide