11-08-2021 10:54 PM - edited 11-08-2021 10:54 PM
Hey all!
I have permission to use an activation token with Export-Controlled Functionality. I need this for OAuth to work properly and CP-78xx/88xx via MRA. Should I switch to version CUCM Restricted from CUCM Unrestricted for use this activation token?
Solved! Go to Solution.
11-09-2021 02:23 AM - edited 11-09-2021 02:23 AM
Hi,
I'm not sure about that, haven't had this situation up until now. I would say, yes.
To be sure, in my case, I would re-register it. Shouldn't be a problem in normal cases.
11-09-2021 02:52 AM
1) Generate new Tocken with Export-Controlled Function
2) On CUCM - System - License Management to the upper right corner and
3) Select from the drop-down list: Re-register
Thats All ))
11-11-2021 07:00 PM
11-09-2021 02:00 AM
Hi,
no, you don't need to switch from restricted to unrestricted.
11-09-2021 02:16 AM
Hey b.winter
That is, I just need to re-register it with a new token?
11-09-2021 02:23 AM - edited 11-09-2021 02:23 AM
Hi,
I'm not sure about that, haven't had this situation up until now. I would say, yes.
To be sure, in my case, I would re-register it. Shouldn't be a problem in normal cases.
11-09-2021 02:52 AM
1) Generate new Tocken with Export-Controlled Function
2) On CUCM - System - License Management to the upper right corner and
3) Select from the drop-down list: Re-register
Thats All ))
11-09-2021 02:33 AM - edited 11-11-2021 09:21 AM
Hope you are on version 14.
OAuth support for SIP registrations is extended for
Cisco Jabber devices from Cisco Unified Communications Manager 12.5 release onwards
SIP Phones from Cisco Unified Communications ManagerRelease 14 onwards
Ensure Mobile and Remote Access is configured and the connection is established between Unified Communication Manager and Expressway.
Ensure Unified Communications Manager is registered to a Smart or Virtual account with allow export-controlled functionality.
Ensure client firmware supports SIP OAuth.
11-09-2021 02:41 AM
Hey Nithin
Yes, I am using 14SU1. And precisely because of the options listed you above, I asked Cisco set Export-Controlled Function as Allowed in my Smart Account. I will it do now
11-09-2021 03:21 AM - edited 11-09-2021 03:22 AM
And in the End:
VMware Installation:
2 vCPU: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz
Disk 1: 110GB, Partitions aligned
8192 Mbytes RAM
admin:utils sipOAuth-mode enable
Failed to set SIP OAuth mode.
SIP OAuth mode may not be enabled on an export unrestricted (XU) version of Cisco Unified CM
Executed command unsuccessfully
admin:
Epic fail.... interesting work ahead)))
11-09-2021 06:21 PM - edited 11-11-2021 09:21 AM
Let me try this on my Lab.
11-09-2021 08:16 PM
11-11-2021 12:54 AM
Hey Nithin
Have you any news for me?
11-11-2021 01:31 AM - edited 11-11-2021 02:08 AM
I don't know, if that answers your question, but regarding this discussion (https://community.cisco.com/t5/collaboration-voice-and-video/migration-from-unrestricted-to-restricted-cucm-version/ta-p/3160201) there is no way to change from unrestricted to restricted.
It seems, that you have to install a restricted version and configure / bulk everything in there.
11-11-2021 02:36 AM
I know there is no migration mechanism, but both versions support importing anything from CSV via Bulk Administrator. The main thing is to bind phones to users, the latter I will take from AD
11-11-2021 07:02 PM
You need to make use of Bulk export/import method when migrating from unrestricted to restricted.
11-11-2021 10:33 PM
I thought it was possible to restore the DRS backup to do this?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide