04-14-2020 11:03 AM
Hello,
I have this weird problem that I'm working on where when I call a number from the SIP phone, CUCME only gets the first digit. That happens if I go "off-hook" by pressing the speakerphone button or lifting the receiver and dialing the number. HOWEVER, if I punch in the number first, and press the call soft key, or lift the receiver (after having punched in the full phone number first), then the CUCME gets the full number and completes the call successfully.
What is going on??
Solved! Go to Solution.
04-14-2020 11:19 AM
Likely your running into this problem, https://community.cisco.com/t5/ip-telephony-and-phones/on-off-off-hook-digit-strip-issue-on-cme/td-p/2784724
04-14-2020 11:19 AM
Likely your running into this problem, https://community.cisco.com/t5/ip-telephony-and-phones/on-off-off-hook-digit-strip-issue-on-cme/td-p/2784724
04-14-2020 12:05 PM
You are correct, Roger. The following line applied to my voice register pools fixed it.
no digit collect kpml
04-14-2020 12:42 PM
Well I’ll be dammed, glad that I was able to help you with this also.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide