Easy One for you!!!

[Nathan Hardman]

Hi Everyone,

Some more help please

Basically the customer user 9 for outside line and want to be able to ring there missed calls but are not able to as there is no 9 infornt of the number.

Thanks

Nathan

[chris.bourroughs · Accepted solution]

Hi

If this is a H.323 gateway, you can use a translation rule on the gateway like below :

translation-rule 1

Rule 1 ^.% 9

then apply to the dial-peer going to CUCM

dial-peer voice 1000 voip

incoming called-number .

destination-pattern 4...

translate-outgoing calling 1

session target ipv4: X.X.X.X

For a MGCP gateway, you would achieve this on the CUCM

HTH

[Rob Huffman]

Hi Nathan,

Just to add a tip to the good references from Chris  +5

Add Prefix to the Missed Call Number

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml

Cheers!

Rob

[Nathan Hardman]

Thanks for that guys i will test and get back to you when ive implemented it.