Enterprise License Manager 9.1 used Ports

[harisivaji]

Hi All

What are the ports need to be opened between Enterprise License Manager standalone server and CUCM/CUC Publisher to communicate

I searched the below documents but not able to find the required details

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_1_1/CUCM_BK_EDEFFAEB_00_enterprise-license-manager-user-91.html

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/9_1_1/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91.html

Can anyone help me on this

Thanks

Hari.Sivaji

[harisivaji]

Any Reply ??

[Chris Deren]

I don't see that documented anywhere either, but why would you need to put firewall in between ELM and the UC application?  I would not be surprised if that was not supported.

HTH,

Chris

[harisivaji]

Hi

The present Network setup is provisioned in that way due to various network reason. Also since it can also be in standalone server, just curious to know how this will communicate to PUB 

Well if that is not officially supported, then its a big change in the client network

Thanks

hari

[Jaime Valencia]

Couldn't find anything on this, I believe you're the very first person to ask this info.

If you're entitled for PDI, you can open a case with us, and we might be able to get the info from the BU.

If not, your SE/AM would be the next point of contact to get this info, and get it somewhere in the documentation.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[harisivaji]

Thanks

I have opened the case with PDI.

Atleast, I am glad to know about you and PDI from here. Hope i may get a reply

Regards

Hari

[Abbas Hussain]

Hi

ELM  used ports are listed in this document.

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/hcs/9_2_1/Renditions/solution-reference-network-design-921.pdf

Thanks