01-09-2018 04:12 AM - edited 03-19-2019 01:02 PM
Hello All,
We have recently installed expressway C in our network but not able to access it via GUI or SSH.
Suspecting issue with installation we have done re-installation as well.
Any suggestions or support ?
Regards,
Balram
Solved! Go to Solution.
01-22-2018 04:10 AM
Hello All,
The issue was related to IP address conflict as the same IP add was assigned to multiple server.
Thank you for your response.
01-14-2018 11:23 PM
Hi Balram,
Can you check if the VM is in correct VLAN/port group?
Regards,
Aseem Anand
01-18-2018 07:43 PM - edited 01-18-2018 07:45 PM
Did you remember to allocate a Virtual NIC to a Physical NIC interface in the VM host? Pages 22 and 23 of the Install Guide.
Please remember to mark helpful responses and to set your question as answered if appropriate.
01-22-2018 04:10 AM
Hello All,
The issue was related to IP address conflict as the same IP add was assigned to multiple server.
Thank you for your response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide