ā06-04-2019 07:28 AM
Hi all,
in our test cluster (12.5 CUCM/IMP) we enabled SSO.
During the enable process the admin account login test was successful.
Now I see additional links on the main CUCM web page:
Recovery URL to bypass Single Sign On (SSO)
But behind each of that links now I get:
type: Status Report
Message: /ccmadmin/localauthlogin
Description: http.404
or
type: Status Report
Message: /ucmuser/localauthlogin
Description: http.404
...
Even that bypass links don't work.
Has anyone experienced the same?
Best Regards
Paul
Solved! Go to Solution.
ā06-05-2019 07:22 PM
ā06-05-2019 07:22 PM
ā06-06-2019 01:44 AM
ā04-10-2020 03:53 AM
Hi All,
May I check what is the workaround? enabled SSO, encountering the issue now...
Thanks!
ā04-10-2020 06:51 AM
After I forward the instruction from https://quickview.cloudapps.cisco.com/quickview/bug/CSCvg50338.
**Applied: run sql update processnode SET tkssomode = 2 where name = 'CUCM HostL'
I can reach the ccmadmin, but it is required "SSO" sign in, and I can't enable "SSO" from GUI.
Any idea to re-activate SSO? thanks!
ā07-22-2020 11:31 PM
You should not do that DB update before you have SSO properly setup in your system. Revert the change to the DB and start over again with setup of SSO, then check if youāre hit by the defect. If you are do the workaround again.
ā07-21-2020 10:59 AM
I had the same issue with a version of CUCM that was in the list of known fixed releases. Applied the cli sql command to enable SSO and it's working. Thanks for this post!
ā10-29-2020 09:16 PM
Thank you - That worked for me on CUCM ver 12.5
ā10-30-2020 02:53 AM
Many Thanks ! I'm hit this bug with cucm vers 12.5.1.13900-152 and the workaround works well.
it's incredible that the sso in cucm is not fixed also with this very recent release
ā02-14-2023 06:08 AM - edited ā02-14-2023 06:31 AM
Heads up, I've had this exact issue out of the blue for IM&P 14. The workaround fixed it, I'll be updating if it reoccurs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide