01-18-2014 02:21 AM - edited 03-19-2019 07:46 AM
Hello.
I've successfully upgraded CallManager from version 6.1.5 (hw on mcs) to 9.1.2 (virtual on UCS).
All seems ok.
My only doubt is about an error that I receive on RTMT:
Service operational status is DOWN. Cisco SOAP - CallRecord Service.
This error cycle continuosly, with another one related:
the following SyslogSeverityMatchFound events generated: SeverityMatch : Critical MatchedEvent : Jan 18 11:12:48 CCM01 local7 2 : 1059: CCM01.local: Jan 18 2014 10:12:48.430 UTC : %UC_SERVICEMANAGER-2-ServiceFailed: %[ServiceName=Cisco SOAP - CallRecord Service][Reason=Service stopped abruptly][AppID=Cisco Service Manager][ClusterID=][NodeID=CCM01]: Service terminated. AppID : Cisco Syslog Agent
Anyone can help me?
Thanks
Daniele
Solved! Go to Solution.
07-04-2014 02:53 AM
Hi Daniele,
have you been able to resolve this?
We're facing similar errors after upgrading from 9.1.2.11900-12 to 9.1.2.12900-11:
ServiceName=Cisco SOAP - CallRecord Service and ServiceName=Cisco SOAP - CDRonDemand Service are crashing periodically every 5 minutes.
Thank you,
Helge
01-19-2014 02:06 AM
Another information: the error occurs every 3 or 4 hours, than the service restart...
I can't understand why this happen.
Any suggestion will be appreciated.
Daniele
01-23-2014 12:24 AM
Please, anyone can't help how to troubleshoot this problem?
01-23-2014 06:30 AM
Hello
Can you please check the system having core and check system status with below command
utils dbreplication runtimestate (run on the pub of the cluster) Utils diagnose test Utils core active list
SOAP-Real-Time services APIs allow you to collected real time information for devices and CTI
applicaitons,though its an optional servies and it has not impact when it goes down, if the servies
goes down its normal event that could have been due to API's not recieved and to recover them it restarted.
Br,
Nadeem
Please rate all useful post.
01-23-2014 07:31 AM
Hello Nadeem.
Thanks for your reply.
I attach here commands output:
admin:utils dbreplication runtimestate
DB and Replication Services: ALL RUNNING
DB CLI Status: No other dbreplication CLI is running...
Cluster Replication State: BROADCAST SYNC Completed on 2 servers at: 2014-01-14-11-20
Last Sync Result: SYNC COMPLETED 603 tables sync'ed out of 603
Sync Errors: NO ERRORS
DB Version: ccm9_1_2_11900_12
Repltimeout set to: 300s
PROCESS option set to: 1
Cluster Detailed View from CCM01 (3 Servers):
PING CDR Server REPL. DBver& REPL. REPLICATION SETUP
SERVER-NAME IP ADDRESS (msec) RPC? (ID) & STATUS QUEUE TABLES LOOP? (RTMT) & details
----------- ------------ ------ ---- -------------- ----- ------- ----- -----------------
CCM01 192.168.57.7 0.061 Yes (2) Connected 0 match Yes (2) PUB Setup Completed
CCM02 192.168.57.11 0.380 Yes (3) Connected 0 match Yes (2) Setup Completed
CCM03 192.168.57.26 0.185 Yes (5) Connected 0 match Yes (2) Setup Completed
admin:utils diagnose test
Log file: platform/log/diag1.log
Starting diagnostic test(s)
===========================
test - disk_space : Passed (available: 2652 MB, used: 11503 MB)
skip - disk_files : This module must be run directly and off hours
test - service_manager : Passed
test - tomcat : Passed
test - tomcat_deadlocks : Passed
test - tomcat_keystore : Passed
test - tomcat_connectors : Passed
test - tomcat_threads : Passed
test - tomcat_memory : Passed
test - tomcat_sessions : Passed
skip - tomcat_heapdump : This module must be run directly and off hours
test - validate_network : Passed
test - raid : Passed
test - system_info : Passed (Collected system information in diagnostic log)
test - ntp_reachability : Passed
test - ntp_clock_drift : Passed
test - ntp_stratum : Passed
skip - sdl_fragmentation : This module must be run directly and off hours
skip - sdi_fragmentation : This module must be run directly and off hours
test - ipv6_networking : Passed
Diagnostics Completed
admin:utils core active list
No core files found
admin:
I know that SOAP service can fail and restart itself, but it happens too frequently...
Thanks
Daniele
01-23-2014 08:18 AM
Did you try to restart the services. can try that and check whether this having frequent after this
You can s restart for the following page: Cisco Unified Serviceability> Tools> Control Center - Network Services> SOAP Services> SOAP -Performance Monitoring APIs.
Br,
Nadeem
Please rate all useful post.
02-06-2014 12:45 AM
I've tried to restart service yet.
Service die and restart about every two hours...
I can't understand why this happens
02-19-2014 02:12 AM
Any other suggestions?
02-19-2014 10:03 AM
Hi Daniele.
Try to put to false run on flag value of call detail record service parameter and restart Cisco Soap Call record network service.
Let me know
Regards
Carlo
Sent from Cisco Technical Support iPhone App
06-20-2016 11:07 AM
We were receiving the SOAP alerts on one server in our cluster of 4 Subs. Restarting the SOAP services that were already restarting did nothing, but restarting the Tomcat service did the trick without having to regenerate the Tomcat certificate.
07-04-2014 02:53 AM
Hi Daniele,
have you been able to resolve this?
We're facing similar errors after upgrading from 9.1.2.11900-12 to 9.1.2.12900-11:
ServiceName=Cisco SOAP - CallRecord Service and ServiceName=Cisco SOAP - CDRonDemand Service are crashing periodically every 5 minutes.
Thank you,
Helge
06-10-2015 01:15 AM
Hi Guys
Did you manage to solve this ?
Thanks,
Tom.
06-10-2015 04:48 AM
Resolution Summary:
Regenerated Tomcat certificate resolved the issue.
Cheers, Helge
06-10-2015 06:16 AM
Hi Helge,
Thanks for the response.
I tried that and unfortunately the service is still crashing randomly.
Any other thoughts ? i'm running CUCM 10.5.2.
Tom.
08-17-2015 02:42 PM
Hi All,
I am coming across the same issue and wondering if there is a known solution for this or if any of you manage to solve your issues, if so any suggestions?
So far, I have performed the following;
utils dbreplication runtimestate (run on the pub of the cluster) Utils diagnose test Utils core active list
I did not find anything out of the norm, everything passed, no core dumps found, and dbreplication status is "(2) Setup Completed". I've reviewed the Tomcat certificates and all are up to date, none expired.
Any insight or suggestions are greatly appreciated.
Thanks in Advance!
Diana
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide