11-14-2012 07:57 PM - edited 03-19-2019 05:52 AM
Hi just need some clarification, so in a CUC cluster, i create
- line group for CUC Pub
- line group for CUC Sub
- Hunt list for Pub, assigning Pub line group
- Hunt list for Sub, assigning Sub line group
- Hunt Pilot for both Pub and Sub
- Voicemail Pilot for both Pub and Sub,
or
- line group for CUC Pub
- line group for CUC Sub
- Hunt list for Pub and Sub Line group
- Single hunt pilot
- Single voicemail Pilot
Thanks
Nki
Solved! Go to Solution.
11-15-2012 03:27 AM
You do both. You need the second set of steps listed for normal call-in functionality. The per-server configuration gets added to that (only the line groups are reused) to provider server-specific TRaP connections.
Please remember to rate helpful responses and identify helpful or correct answers.
11-15-2012 06:26 AM
Hi Nki,
Just to add a little note to the great tips from Jonathan (+5 "J-Man" )
This info from Tray may help;
https://supportforums.cisco.com/docs/DOC-17160
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
11-15-2012 03:27 AM
You do both. You need the second set of steps listed for normal call-in functionality. The per-server configuration gets added to that (only the line groups are reused) to provider server-specific TRaP connections.
Please remember to rate helpful responses and identify helpful or correct answers.
11-15-2012 06:26 AM
Hi Nki,
Just to add a little note to the great tips from Jonathan (+5 "J-Man" )
This info from Tray may help;
https://supportforums.cisco.com/docs/DOC-17160
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide