cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
532
Views
5
Helpful
8
Replies

Voice Translation Rules -CME/CUE

Can anyone tell me the command line to add a voice translation rule for forwarding a # temporarily??

CME/CUE Version 8.5

I need number 512-333-3444 forwarded to 512-519-0056

and I need to know how to delete that rule once I no longer need it

I believe I would start in config t

then : voice translation - rule 3

rule 1

 

then not sure after that :)

would really love some help on this today!

 

Ray Delahoussaye

1 Accepted Solution

Accepted Solutions

:-) don't mention R1, just copy below in co fig t mode..

num-exp 5123333444 5125190056

Suresh

View solution in original post

8 Replies 8

Jaime Valencia
Cisco Employee
Cisco Employee

There are plenty of documents explaining how to configure voice translation rules on cco, have you reviewed them???

HTH

java

if this helps, please rate

i looked at a few but haven't seen any specifically for voice translation for forwarding

maybe I was looking in the incorrect place

Suresh Hudda
VIP Alumni
VIP Alumni

You can use num-exp command which is similar to translation rule..test it out

R1 (Config) num-exp 5123333444 5125190056

Suresh

Hi suresh!

do I give it a name or is it just

config t

R1 num-exp 5123333444 5125190056

 

is there a space between the two numbers??

 

Ray

yes there is a space between numbers & no need to give any name,just goto conf T mode and type this and test.

Suresh

Thank you Suresh,

I tried it. I get Invalid Character detected on the R1

I assumed I needed that part as well or should I leave it out?

 

Ray

 

:-) don't mention R1, just copy below in co fig t mode..

num-exp 5123333444 5125190056

Suresh

it did not work.

people attempting to send to the fax# just get a fast busy.

might be something else going on.

command and function may be correct but could possibly be another issue within our system