Unified Computing System Discussions

Hello Community Does anyone know if the Following Diagram from the Cisco Flexpod Design guide exists in Visio format anywhere? http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/UCS_CVDs/flexpod_esxi60_n9k_design.docx/_jcr_content/rendit...

I have a customer who is seeking the following: We are interested in receiving a copy of the test results for the 5 different patches that Cisco released.  I would expect that Cisco would have 5 sets of test results (1 for each release of code).  We...

Hi guys, I would like to know about the Cisco VPC-DI (vEPC (MME+SGW+PGW)), I have to install a vEPC with UCS 5800 (with 5 blades B200) and two Fabric Extender 6248UP, however I don't get it documentation about this configuration. I would like that he...

Please review If i can follow the below steps.   1- Create a New Boot Policy 2- Modify the Updating Service Profile template to use the New Boot Policy. 3- With Maintainence Policy Setup to UsrAck, When I Ack and reboot a single host the new boot pol...

Hi all, I wonder if i can directly connect 2 6248UP's without going over an upstream nexus What i want to accomplish is this : I have a number of racks all equipped with 6248UP's (main&backup).  In 1 rack i have storage (NAS&SAN) that is only used ...

ok i have 5  usc machines and doing the bios updates and CIMC updates  on 4 machine no issues . for some reason on the last machine it waned to be a pain .. i did the bios update just like all the other machines that are working and online ..  and th...

Hi everyone, I'm managing an UCS system running firmware version 3.1(2b). Currently, there are a pair of port-channel displaying state down when checking by CLI or monitored by Solarwind (portchannel 1440 & 1441 in attached images). CLI logs on FI-A:...

I have read this document: http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/110511-ucs-fw-mgmt-00.html Specifically: Image Delete Here are some best practices to consider when you delete images: You can use the UCS...

We have one rack mountable server connected to our UCS mini that then connects to our SAN. We want to populate the C220 with 16 x 2TB disks.  As I understand it the onboard RAID controller can only run 8 disks. Therefore our company purchased a Cis...

Is QLogic QLE2562 HBA card with part number P/N: PX2810403-01 L compatible with Cisco UCS C220 M3 ? As the card cannot be read by the bios and when the server detect it, after restart it disappears and so on.