Unified Computing System Discussions

Hi All,    Is there a new Custom ESXI 5.5-U-3b being released by VMware for security vulnerabilties being reported.    Please share us the link or steps for downloading / upgrading to the latest version T.Deanesh

Hello everyone! After many tries of solving problem I would like to ask for help. I have got 6 servers UCS C240 M3L with Cisco UCSC RAID SAS 2008M-8i controllers. My colleagues see problems with write to drives, so they did speed test. In results we ...

Hello, I am curious the exact functions behind the firmware on the HDD's in UCS B-series and C-series servers. On the C-series when performing a HUU it gives the option to "Update HDD Firmware". So here is my questions; 1. If hard drives in a raid a...

Hello,My client recently purchased UCS C220 M3 which comes with pre-installed esxi 5.1.Customer wants to upgrade esxi to latest ver 6.x.I checked with VMWare and they confirmed upgrade esxi from 5.x to 6.x requires license and we are not eligible to ...

I have a question about Cisco Integrated Management Controller (IMC) Supervisor version 2.1.0.0. I tested email sending from CIMC Supervisor but it was unsuccessful as below picture.I’m not sure, I think it’s because I cannot configure connection sec...

we refer a Cisco TAC document attached with this post and following it.  In our environment , we have following :-   1)  Windows 2012 R2 Hyper-V hosts (UCS B200 M4 Blade servers) are not configured for SAN boot but from local storage.   2) We are nei...

Hello, Currently, we have a UCS domain that is registered to UCS central. UCS central has been inoperable for a while. The question is this. If we remove our UCS domain from UCS Central( not functioning) will it have any unexpected results such as......

Hi All,Just a question for anyone who has seen this at all. (Might be staring me in the eyes!)I http to Fabric Interconnect (A) and java works fine. Type in the uname and password and log in to UCSMI http to FI(B) and java work also fine prompting me...

Hi, I have a C240 M4 LFF with 12x 8Tb disks and i can't install Windows Server 2012 R2 on it I think this disks are 4Kn and is necessary to install Windows in UEFI mode, so in CIMC I've created a Raid 5 DG with all disks and initiated it and change...

Hi, every time I re-acknlowledge a server or perform a host firmware update UCSM will disable the TPM in my C240-M3 Systems. In the BIOS policy the TPM is configured to be enabled. When UCSM is able to disable the TPM, why isn't it able to enable it,...