Unified Computing System Discussions

Isn't UCSM supposed to failover and become available again if there is a crach or reboot of the primary FI? I rebooted one of our UCS domains and when I booted the primary, it closes down UCSM. I never see a ping come back for the virtual UCSM ip unt...

I have some new UCS domains at 2.2.3G and on the firmware auto install tab\general tab, there is a new column named managing instance. This must be a 2.2 addition as my current 2.1.3B domain does not have it. Should all the blades have the same manag...

Which UCS C-Series servers offer native support for hot-pluggable NVMe PCIe3.0?

Hi All,We have a Cisco UCS rack mount server that currently has 4 drives configured in a raid with one being a spare.  We need to add storage so we have ordered 5 other drives and want to set up another raid volume with a spare..  So basically we lau...

What can i use to see how much bandwidth is being used on my fabric interconnect ports over a X period of time? Is there software available?

Does the firmware update immediately reboot the server or just update the firmware partition?  If so does IMC supervisor provide any warnings?  Will it update all components such as the VIC, RAID controller, etc.  The management guide is a bit lackin...

We are running SCOM 2012 R2 and trying to configure the UCS management pack but are seeing errors    < Data > Cisco UCS MP (https://fqdn:443) [Cisco.Ucsm.Proxy.LoadCache.ProbeAction.ps1] </ Data >  < Data > Could not load file or assembly 'file:///C:...

hello, i have two ucs c220m3 and now i have isntalled expe in one ucs and expc in one ucs.as now for expe, i created new vswitch 1 and assign 1 port from UCSC200M3 4 port network card but it is not pingable from DMZ switch.as port is showing connecte...

Hi,We have recently updated to Version 1.3(1a) of Ucs Central.  The new interface worked a few times now if we either try to switch from the login prompt even if already login we get this message:java.net.ConnectException: Connection refusedthis shou...

Hi,We've recently updated our UCS to the latest release, which finally adds support for VM-FEX for 2012 R2.  However, the supposed official method to manage VM-FEX for Hyper-V is using the UCSM Provider in Microsoft VMM 2012 R2.Has anyone been able t...

I have B200M3s with only 1240VIC. No additional mezzanine card. So I get 40GB throughput (20 to fab A) (20 to fab b) but on my 2208XP I only have 2 uplinks going to the FI. So thats 20GB per IOM Tops. Do I need to add more links between my IOM and FI...