cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
433
Views
0
Helpful
3
Replies

do I need to add more links to my 2208XP

Dragomir
Level 1
Level 1

I have B200M3s with only 1240VIC. No additional mezzanine card. So I get 40GB throughput (20 to fab A) (20 to fab b)

 

but on my 2208XP I only have 2 uplinks going to the FI. So thats 20GB per IOM Tops.

 

Do I need to add more links between my IOM and FI to get more balance throughput between the blades and FI?

 

From what I understand, The more NIFs I have,  I will have less HIFs per NIF and thus have better balance throughput and less congestion?

 

So if I increased the NIFs to 4, I will have only 8HIF/4NIF = 2 slots/nif as opposed to what I have currently which is 8HIF/2 = 4 slots/nif?

 

 

3 Replies 3

Walter Dey
VIP Alumni
VIP Alumni

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-1/b_UCSM2-1_C-Integration/b_UCSM2-1_C-Integration_chapter_01.html

 

Maximum Configurable vNICs/vHBAs Based on Number of FEX Uplinks

The following table describes maximum configurable vNICs/vHBAs on a VIC adapter based on the number of FEX uplinks:

Table 2 Cisco UCS 6100 Fabric Interconnect

Acknowledged link between FEX and FI

Maximum configurable vNICs/vHBA on a VIC adapter for the VIC adapter 1225, 1225T, 1227, 1227T

Maximum configurable vNICs/vHBA on a VIC adapter for the adapter VIC P81E

1

Not supported

Not supported

2

3

4

4

9

10

8

21

22

Table 3 Cisco UCS 6200 Fabric Interconnect

Acknowledged link between FEX and FI

Maximum configurable vNICs/vHBA on a VIC adapter for the VIC adapter 1225, 1225T, 1227, 1227T

Maximum configurable vNICs/vHBA on a VIC adapter for the VIC adapter P81E

1

12

13

2

27

28

4

57

58

8

117

118

I am looking at this

 

http://d2zmdbbm9feqrf.cloudfront.net/2014/usa/pdf/BRKCOM-2003.pdf

 

it looks like the more NIFs I have, on the 2208XP, if I use all 8 links, then each server slot will have their own NIF?

 

IF I use 4, then each NIF will be shared between 2 hosts

 

so would i get better throughput if I use all 8 links on the 2208XP?

 

Your servers will not "fight" for bandwidth anymore so I guess that is a yes...so your IOM wont be a bottleneck for the servers...

Hope that answers your question.

-Kenny

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card