Unified Computing System Discussions

I have configured LDAP authentication through Microsoft Active Directory for the UCSM system. It's been working well. I went to configure LDAPs for secure authentication with my LDAP servers today and I received the pop up message: "Warning: Port 636...

Hi!Did any one run into UCSM font display is too small on Windows 8 , 10 inch tablet?  Is there anyway to change the font in the UCSM?

We have a Cisco C240 M3S server that we have imported into our UCS Management Software. We have some PCIe cards that can run warm under load, and due to this we had changed the 'PowerPolicy/FanPolicy' to High Power, which dropped the temps a good 10C...

Hi,i have configured vm-fex on ucs manager 2.2 with VIC 1240 and it is working fine,but when i check in vcenter i can found only 1 physical adapter is in use and  second is still connected to vswitch0, can anybody please help me what i missed in my c...

Is it possible to connect the same pair of Fabric Interconnects to two(2) different Datacenter Switches and restrict  a subset of our B-series blades to only use the new datacenter switches while the remaining blades would continue to use the current...

Greetings UCS Community.  Somewhat new to UCS system and have had to do extensive troubleshooting to get our Fibre Channel SAN talking to our FIs.  I was wondering if our 6248 FIs support the use of FCPING or FCTRACE to the upstream FC switch we conn...

When we install Windows Server 2012 R2 Update (specifically using Windows Server 2012 R2 Update 1 ISO), mouse and keyboard does not respond after server is installed. Is it a known issue or is there specific firmware or UCS version requirement to sup...

Hi Team: I am on the UCS Firmware upgrade Process, and I am getting the following error: fsmFailExtvmmProviderConfig Fault Code:F999919 Message [FSM:FAILED]: sam:dme:ExtvmmProviderConfig Explanation None set. Fault Details Does Anyone has gotten a si...

We have ucs central configured for AD auth, it works fine when logging into ucs central.  When logging into ucsm AD authentication does not work.  The settings for each ucsm are configured to pull from ucs central. Any ideas why it would not be pulli...

Cisco Unified Computing System (UCS) Mini Architecture, Troubleshooting and Upgrade Ask the Expert Continuing Discussion(Live Webcast May 12, 2015 at 10:00 am Pacific Time / 1:00 pm Eastern Time)Ask questions from Tuesday, May 12th, 2015 to Friday, M...

Hi,we have setup iSCSI booting on a new B200 M3 blade that has a ViC 1240. When the blade boots up & goes through the iSCSI boot, the "first" iSCSI boot option ROM is successful, but the second one shows the "initialize error 1" error. when i look at...

customer has a UCSM 2.1.2a, B200-M3, one VIC-1240, creates a SP template with vnic0,1,2,3 (fabric A,B,A,B); automatic vnic/vhba placement; then creates multiple SP's and installs W2012 (not R2) on the local disk and claims that he sees different PCI ...