06-16-2012 07:55 AM - edited 03-01-2019 10:28 AM
I have been attempting to download new UCS firmware version into my UCS Fabric Interconnect using FileZilla and I keep getting the error '550 File not found' see sreen capture below. What could be the issue??
Solved! Go to Solution.
06-16-2012 09:48 PM
from the filezilla log you are attempting to download 'F:ftproot/ucsb' from the FTP root directory and this is invalid.
Try leaving the path blank in the UCS, and placing the file in the root directory of the FTP server and entering only the filename and IP into the UCS.
Also TFTPd32 is much simpler if you don't need FTP, the only configuration possible in TFTPd32 is root directory and IP address.
06-16-2012 07:59 AM
As per the Filezilla error log looks like it can't find the filename you've specified in the UCSM download task.
Check your path & filename (including extension).
Might want to upload the new firmware via Local Browse rather than FTP (requires UCSM 1.4 or later).
Regards,
Robert
06-16-2012 11:19 AM
Hi Robert,
Thank you for the reply. I am using UCSM 1.3, that's why I have to use FTP. I have checked the path & filename but still success.
06-16-2012 09:48 PM
from the filezilla log you are attempting to download 'F:ftproot/ucsb' from the FTP root directory and this is invalid.
Try leaving the path blank in the UCS, and placing the file in the root directory of the FTP server and entering only the filename and IP into the UCS.
Also TFTPd32 is much simpler if you don't need FTP, the only configuration possible in TFTPd32 is root directory and IP address.
06-17-2012 04:40 AM
Hi chaausti,
Thanks. It worked..by leaving the Remote path blank. Thank you once again and thank you Robert Burns.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide