Unified Computing System Discussions

Anyone seeing FaultCode F0391 - Description = Power Supply 1(2,3,4) in chassis 1 voltage:upper-non-recoverable.The chassis at this customer keeps reporting these across the four PS, then clears after approx 1 minute.Thanks!

I will be using vPC End Host Mode with MAC-pinning. I see I can further configure MAC-Pinning. Is this required or will it automatically forward packets by just turning it on? Is it also best not to enable failover for the vnics in this configuration...

<< Original post by Shai Edny. Answered by Robert Burns. Moving from documents section to discussions. >>HelloI have a small problem , I have a server UCSC-C220-M3SAnd I want to know If this PCI card can work on this server ? (UCSC-C220-M3S)The card ...

Hi All.I have a very strange situation. Recently arrive the new UCS 2.0(3a) to our site. After a week of running without problem the fabric interconnect B went down ( this happens twice ).If I do a porfic03-B# show cluster extended-stateStart time: T...

Hi,I am trying to get a definitive answer to how switching and routing occurs in the UCS environment described below. I am also looking for a"primer" on the functions and overall process the IC plays in the UC.We currently have 2x6120 conected to 6 c...

Can anyone please advise what this message means and why a host reset causes it?If I disassociate and re-associate the SP the error goes away, although this isn't much fun when the server boots from iSCSI.Currently running 2.0(2Q).

Hi,if we want to manage a C200 by a 6200 via a 2232, do we always need to connect both the 1Gbe and 10Gbe interface?In our existing C200 we don't have any VIC's and both cards are connected to some other network, so we only want to connect the 1Gbe I...

A Cisco UCS 6296UP Fabric Interconnect costs $96,000 each. That includes hardware for 96-ports (the chassis plus 3 expansion modules) but enough licenses to only enable 18 of them.Each additional license is $2,774 PER PORT. That means 78 x $2,774.So,...