FI-6324-B /fc-uplink # show

xiazhen01 · ‎08-10-2016

hi, all:

anyone can help me ?

on the FI 6324 , the fc-port status is admin down. addition info : administratively down.

what's wrong with the fc-port,

FI-nantian-B /fabric-interconnect # show port

Ether Port:

Slot Aggr Port Port Oper State Mac Role Xcvr
----- ---------- ----- ---------------- -------------------- ------- ----
1 0 2 Sfp Not Present 8C:60:4F:3D:0E:C8 Network N/A
1 0 3 Up 8C:60:4F:3D:0E:C9 Network 10 Gbase SR
1 0 4 Up 8C:60:4F:3D:0E:CA Network 10 Gbase SR
1 5 1 Sfp Not Present 8C:60:4F:3D:0E:CB Unknown N/A
1 5 2 Sfp Not Present 8C:60:4F:3D:0E:CC Unknown N/A
1 5 3 Sfp Not Present 8C:60:4F:3D:0E:CD Unknown N/A
1 5 4 Sfp Not Present 8C:60:4F:3D:0E:CE Unknown N/A

FC Port:

Slot Port Oper State Wwn
----- ----- ---------------- ---
1 1 Admin Down 20:01:8C:60:4F:3D:0E:C0

how to solve it ?

Walter Dey · ‎08-10-2016

Hi

The port is in default VSAN = 1 ? I don't think this is correct ?

I hope you defined at least one VSAN for each FI, different from 1 ! eg. 20 on FI-A and 30 on FI-B.

The port VSAN on the FI has to match with the one on the MDS !

Walter.

xiazhen01 · ‎08-10-2016

hi, walter dey:

according your request, has already change to VSAN 102.

the status of port is admin down,

Walter Dey · ‎08-11-2016

Hi

Please post the output of the following CLI (connect nx-os) for UCS and connecting MDS ?

sho interface fc ....

- do you have FC SFP's in this port ?

- are the patch cable MMF ?

- has VSAN 102 "zoning disabled" ?

xiazhen01 · ‎08-11-2016

hi,

Q;show interface fc1/1 logint to FI624

A:

FI-6324-B(nxos)# show interface fc1/1
fc1/1 is down (Administratively down)
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:01:8c:60:4f:3d:11:00
Admin port mode is NP, trunk mode is off
snmp link state traps are enabled
Port vsan is 1
Receive data field Size is 2112
Beacon is turned off
1 minute input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
1 minute output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
0 frames input, 0 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
0 frames output, 0 bytes
0 discards, 0 errors
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
0 output OLS, 0 LRR, 0 NOS, 0 loop inits
last clearing of "show interface" counters never

Q: - do you have FC SFP's in this port ?

A:yes

Q: has VSAN 102 "zoning disabled"

YES,

Q: are the patch cable MMF ?

what's the MMF ?

Walter Dey · ‎08-11-2016

fc1/1 is down (Administratively down)

did you enable the port ? for MDS => no shut

Port vsan is 1

seems to be wrong, 102 ?

MMF ?

Multimode Fibre

btw. on the MDS don't Forget to save the configuration

copy running-config startup-config

xiazhen01 · ‎08-12-2016

HI, walter dey:

now it's new issue , the port always failed at the FI 6324, notice error disable.

port reinit limit reach.

the following output of the mds 9124

mds9124# show interface fc1/5
fc1/5 is down (Link failure: OLS received)
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:05:00:2a:6a:36:ab:00
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port vsan is 102
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
7089424075 frames input, 9974369715812 bytes
0 discards, 6 errors
1 CRC, 0 unknown class
0 too long, 5 too short
4740320790 frames output, 295714237268 bytes
0 discards, 0 errors
28036 input OLS, 36 LRR, 18014 NOS, 0 loop inits
29768 output OLS, 46857 LRR, 28085 NOS, 29753 loop inits
Interface last changed at Thu Aug 11 22:09:32 2016

mds9124# show interface fc1/6
fc1/6 is down (Link failure: OLS received)
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:06:00:2a:6a:36:ab:00
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port vsan is 102
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
218775 frames input, 12778224 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
109710 frames output, 7065064 bytes
0 discards, 0 errors
63 input OLS, 12 LRR, 5335 NOS, 10 loop inits
580 output OLS, 5573 LRR, 142 NOS, 574 loop inits
Interface last changed at Thu Aug 11 22:12:39 2016

for sfp module

it's multimode fibre , the part number: SFP-FC8G-SW

xiazhen01 · ‎08-12-2016

FI-6324-B /fc-uplink # show interface

Interface:

Fabric ID Slot Port Admin State Fill Pattern Oper State State Reason Lic State Grace Prd
---------- ----- ----- ------------ ------------- --------------- ----------------------------------- -------------------- ---------
A 1 1 Enabled Arbff Failed Error disabled - port reinit limit reached
License Ok 0
A 1 2 Enabled Arbff Sfp Not Present SFP not present License Ok 0
B 1 1 Enabled Arbff Failed Error disabled - port reinit limit reached
License Ok 0
B 1 2 Enabled Arbff Sfp Not Present SFP not present License Ok 0

Walter Dey · ‎08-12-2016

Is NPIV enabled on your MDS ?

switch(config)# npiv enable

Is the port VSAN on UCS FI 102 ?

https://supportforums.cisco.com/document/30791/understanding-and-deploying-ucs-b-series-storage-area-networking

xiazhen01 · ‎08-12-2016

FI-6324-B(nxos)# show interface fc1/1
fc1/1 is down (Initializing)
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:01:8c:60:4f:3d:11:00
Admin port mode is NP, trunk mode is off
snmp link state traps are enabled
Port vsan is 102
Receive data field Size is 2112
Beacon is turned off
1 minute input rate 120 bits/sec, 15 bytes/sec, 0 frames/sec
1 minute output rate 544 bits/sec, 68 bytes/sec, 0 frames/sec
694 frames input, 32600 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
993 frames output, 156904 bytes
0 discards, 0 errors
0 input OLS, 0 LRR, 0 NOS, 0 loop inits
135 output OLS, 50 LRR, 0 NOS, 0 loop inits
last clearing of "show interface" counters never

mds9124

ntcloud-mds9124(config-if)# show interface brief

-------------------------------------------------------------------------------
Interface Vsan Admin Admin Status SFP Oper Oper Port
Mode Trunk Mode Speed Channel
Mode (Gbps)
-------------------------------------------------------------------------------
fc1/1 101 auto on up swl F 4 --
fc1/2 101 auto on up swl F 4 --
fc1/3 101 auto on up swl F 4 --
fc1/4 101 auto on up swl F 4 --
fc1/5 102 auto on init swl -- -- // connected to FI 6324
fc1/6 102 auto on init swl -- -- // connected to FI 6324

the NPIV feature is enable at the MDS9124

FI 6324 FC-PORT overall status : Admin down