How to configure email alerts on UCS Cisco IMC

[Pragash22]

Hi Team

I know this question was asked several times in the discussion, but I was not able to find answer for my question.

I am recieving test email from Cisco IMC but would like to know how do i configure if any critical alerts triggered and send those alerts via email? or if SMTP enabled it automatically happens?
Version : 3.0(4p)

[Kirk J · Accepted solution]

Greetings.

Following https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/3_0/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_for_HTML5_Based_Servers_301/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_207_chapter_01011.html#concept_5361BD5E5F3D4BE... 

Minimum Severity to Report drop-down list

Allows you to choose the minimum severity level for receiving the email alert. This can be one of the following:

• Condition

• Warning

• Minor

• Major

• Critical

If you choose a minimum severity level, the mail alerts are sent for that level and the other higher severity levels. For example, if you choose 'Minor' as the minimum severity level, you will receive email alerts for the minor, major, and critical fault events.

Kirk...

[Pragash22]

Thanks Krik, This was really helpful.