06-16-2015 01:26 PM - edited 03-01-2019 12:14 PM
Hello
I have to configure the port channel for the
Any ideas?
Solved! Go to Solution.
06-16-2015 07:40 PM
Just asking... do you really need the port-channel to be in "access" mode? Usually the ports are configured for edge trunk so you can take advantage of virtualization and the port can come up faster while passing multiple vlans.
Did you set up a native vlan in the UCS side? are the ports on the UCS part of the same PCIe card?
-Kenny
06-16-2015 07:40 PM
Just asking... do you really need the port-channel to be in "access" mode? Usually the ports are configured for edge trunk so you can take advantage of virtualization and the port can come up faster while passing multiple vlans.
Did you set up a native vlan in the UCS side? are the ports on the UCS part of the same PCIe card?
-Kenny
06-17-2015 02:50 AM
Hello Keny
I will to
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide