11-22-2012 01:56 AM - edited 03-01-2019 10:44 AM
Hi all,
UCS blade M3 200 is showing RAM Degraded.
None of these resolve the issue.
I decided to collect collect the show tech support but this is stuck at initiating
How can I clear this process and re-issue the show tech support to see if this run
11-22-2012 09:57 AM
Rami,
What version of UCSM??
If the system is still sitting at initializing the tech bundle you can try to force a switchover.
connect local-management
cluster lead b
A RAM degraded message means the system has detected a correctable error but is still being used. This isn't something you can clear by acknowledging the error. It could indicate a problem DIMM. If the OS and BIOS display the max memory amount this means it has not mapped out - which is good. Have a look at the blade's memory stats and see how frequently the CE memory errors are happening. If they happen as a one-time event they may eventually clear. If they continue to occur you should open a TAC case and replace the DIMM.
Regards,
Robert
11-22-2012 01:25 PM
11-24-2012 10:11 AM
Please, use this link to download the TechSupport from the UCS:
http://www.cisco.com/en/US/docs/unified_computing/ucs/ts/guide/TS_GeneralTroubleshooting.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide