UCS B200 M4 server wont entirely boot

[Ferra]

upon receiving power, it does in standby for a bit, before the blade health LED flashes green, and then the power button turns green, and it says that it is testing memory, before going back to standby, with a solid amber blade health LED. The RAM is in, and I have tried reseating it, and I have tried removing the CMOS battery and turning it on, not sure if that is the correct way to reset bios though.

[Steven Tardy]

Seems like you figured out "insufficient-resources,mac-address-assignment" means to add MAC addresses to a MAC address pool.

Were the FI uplinks configured? With UCS you can't plug ports in and expect them to work, the ports must be explicitly configured.

Cisco UCS Manager Network Management Guide, Release 4.2 :: LAN Connectivity :: Uplink Connectivity

[Ferra]

I have not figured out how to select an FI uplink, and any google just results in normal Cisco router information