10-18-2017 07:35 AM - edited 03-01-2019 01:19 PM
We have a couple UCS B200 M2 blades that we would like to add to another 5108 Chassis. The Chassis is currently running 3.1 (2b), the existing blades (B200 M3/M4) are running 3.1(22a) and the Fabric Interconnects (UCS 6296UP) are running 5.0(3)N2(3.12b). Is it possible to add the M2 Blades?
Any assistance would be appreciated!
10-18-2017 01:11 PM - edited 10-18-2017 01:13 PM
Yes it is according to the release notes
Servers |
Minimum Software Version UCS 6200 Series FI |
Minimum Software Version UCS 6332, 6332-16UP FI |
Minimum Software Version UCS 6332, 6332-16UPFI |
Recommended Software Version UCS 6200 Series FI UCS 6332, 6332-16UP FI |
---|---|---|---|---|
UCS-IOM-2204 UCS-IOM-2208 |
UCS-IOM-2204 UCS-IOM-2208 |
UCS-IOM-2304 |
UCS-IOM-2204 UCS-IOM-2208 UCS-IOM-2304 |
|
B22 M3 E5-2400 B22 M3 E5-2400 v2 |
2.2(8a) 2.2(8a) |
3.1(1e) 3.1(1e) |
3.1(1e) |
3.2(2b) |
B200 M2 |
2.2(8a) |
3.1(1e) |
3.1(1e) |
3.2(2b) |
10-31-2017 11:09 AM
Also keep in mind the B200-M2 blade needs a vic1280 to run on 3.1+ firmware.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide