cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
774
Views
0
Helpful
5
Replies

UCS C220 M4 - HOT RAID

Good morning to all,

 

we just purchase an UCS C220 M4-S, but we only have one HDD, we are still waiting for the second one.

I guess there is no problem in start working with VMware and the final VM, and later when the second disk is here make the RAID 1.

 

Can someone confirm I am right, and there will not be any information lost?

Thanks in advance.

 

-----------------

Roberto.

5 Replies 5

Keny Perez
Level 8
Level 8

I think this is not a safe move so you might want to TRY to create the RAID 1 with one disk and see if it is successful, then backup your data when you get the other disk and "rebuild" the array which is actually to "complete" the array...

-Kenny

Do you think it will be possible to create a RAID 1 with only one disk? 

I will try it still.

I have seen ppl doing RAID 0 with one disk (RAID 0 not JBOD) :)

Give it a try and let me know.

 

-Kenny

.

isaac anish
Level 1
Level 1

As per the RAID policy Minimum we required two hardisks for RAID 1 configuration,So if u created array also after rebooting the server it will not work.  

Review Cisco Networking for a $25 gift card

Review Cisco Networking for a $25 gift card