12-28-2018 10:49 PM
Hi, expert
could anyone help me for the UCS problem?
description my problem.
1、 the type of device is UCS 5108 MINI. the blade server is B200M3.
2、 when the profile was created complete , include design to the blade.
3、 login to SAN switch , do't found out the WWN of the blade server.
4、login to FI, display the below error message, please refer the attachment picture.
Have ever try the below the action
1、reinstall the blade server .
2、recreate profile.
3、 replace a new blade server.
the result is same .
appreciate anyone reply
12-29-2018 12:45 AM
Hi @xiazhen01,
Please share below details:
1. UCS firmware version?
2. UCS in FC switching or end-host mode?
3. Status of FC/FCoE uplink?
4. Are you using native FC or FCoE?
5. Uplink switch model & version. If mds, please provide "show flogi internal error" output.
6. Was this working before?
Regards,
MJ
01-01-2019 10:38 PM
HI,MJ:
1. UCS firmware version?
A: 3.2(3h)B
2. UCS in FC switching or end-host mode?
A: end-host mode
3. Status of FC/FCoE uplink?
A: FC
4. Are you using native FC or FCoE?
A:FC
5. Uplink switch model & version. If mds, please provide "show flogi internal error" output.
A: for the switch mode &version , please refer the following
ntcloud-mds9124# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2015, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 1.0.19
loader: version N/A
kickstart: version 5.2(8h)
system: version 5.2(8h)
BIOS compile time: 02/01/10
kickstart image file is: bootflash:/m9100-s2ek9-kickstart-mz.5.2.8h.bin
kickstart compile time: 12/25/2020 12:00:00 [04/28/2016 16:37:28]
system image file is: bootflash:/m9100-s2ek9-mz.5.2.8h.bin
system compile time: 4/30/2016 23:00:00 [04/28/2016 16:58:40]
Hardware
cisco MDS 9124 (1 Slot) Chassis ("1/2/4 Gbps FC/Supervisor-2")
Motorola, e500 with 516128 kB of memory.
Processor Board ID JAF1751ADTL
Device name: ntcloud-mds9124
bootflash: 250880 kB
Kernel uptime is 56 day(s), 0 hour(s), 26 minute(s), 41 second(s)
Last reset at 459697 usecs after Tue Nov 6 22:09:22 2018
Reason: Reset Requested by CLI command reload
System version: 5.2(8h)
Service:
ntcloud-mds9124#
for the command "show flogi internal errors ". please refer the attachment text file.
6. Was this working before?
A: Before is working. have ever unplug electrical cable . again poweron the problem is appear.
12-29-2018 05:28 AM
Can you post your boot order and zoning configuration from upstream switch? UCS may not be logging in correctly if zoning is not configured correctly on your SAN switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide