Hi, My client asked me about a build in or 3-party tool that can monitor traffic on the uplinks that he has that he has on the UCS FI. there is a tool for it? if not, how can I monitor the performance of the UCS FI? FI model-6200 infra version:4.0...
Forum Posts
Resolved! UCS C210 M2 - Storage Inventory Missing
We have UCS C210 M2 in which, when we try to access the Storage tab on the Inventory link, it shows up empty - or blank. Has anyone run into this issue and possibly know how to fix? Thanks in advance for any assistance provided!
I would like to use the two SSD bays in the rear of the C240M4-LFF chassis. In the BIOS, I can put that controller into two modes: AHCI, and LSI Software Raid. I would like my operating system to be able to see the drives as if they are in JBOD mo...
Regarding : https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/HyperFlex_Installation_Guide_for_Intersight/b_HyperFlex_Installation_Guide_for_Intersight/b_HyperFlex_Installation_Guide_for_Intersight_chapter...
Hi Community, I'm having this kind of alarm on VMware ESXi 5.5 - System Board 0 SEL_FULLNESS... How to resolve this issue?
Hello, I faced a big problem. UCS B200-M3 FRU information disappeared after firmware upgrade. Can I recover the fru information?
Currently using FI 6332-16UP, IOM 2208XP and VIC 1340 on each half width blade with no port expansion module.
Hi All I can ping the UCS interface on the router, but not my LAN which means I cannot HTTP to the IMC unit to manage it. This was working fine until I created an ip host entry <domain name> 192.168.0.8 I am pinging from 192.168.0.10 Odd Any suggesti...
Hi, I'm looking for some guidance around upgrading one of our Hyperflex clusters. Currently this is a live cluster of 3 servers running HX 2.1(1b) and ESXi 6.0.0-4192238. I'm aiming to standardaise all of our clusters to 3.0(1i) and ESXi 6.5. I kno...
Hi I have an issue with a b200 m2 after a power failure the issue is : problem identifying server in slot 2ID: 9011341Code: F0157_________________________________________________________________ [FSM:STAGE:REMOTE-ERROR]: Result: unidentified-fail Co...
I have a vNIC template for VMware. The vNIC template has a bunch of VLANs that map to port groups on ESXi servers. I have those vNIC templates in my service profile template that I have used to create some service profiles for ESXi servers. I unb...
I have a UCS C220 M4S that is managed by USCM. The server was built with (4) drives in a RAID10 config. The Local Disk Configuration Policy in the service profile is RAID10 Mirrored and Striped, Protected. I have added (2) additional drives that ...
Anyone knows when Cisco will update their custom iso image of ESXi 6.5? Vsphere 6.5 GA was released today.
I have a L2 disjoint setup (FIA and B) and vlans 10 and 20 pinned to portchannel 2 and vlans 110 and 120 pinned to pc 3. I have 2 vnic from updating template one on FIA and one on FIB. The vnics have vlan 10 and 20. I read UCS sees the vlans for the...
Hi We are looking for the steps to provide full access for a Sub organization with UCS and read only only access to all other organizations and settings / configurations. Can someone help us Thanks in advance
