09-02-2015 03:12 PM - edited 03-01-2019 12:21 PM
Hi guys,
I finally got a chance to try and play with Vmware Virtual Volumes (VVOL) today (available in vsphere/vcenter 6.0) and discovered that the UCS doesn't seem to support it.
I have a Nimble storage array (think SmartStack) that is running the software required for VVOL support (2.3.4).
We enabled everything on the array but then ran into an issue where the hosts couldn't connect to the VVOL volume.
It turns out that there needs to be an additional capability present on the HBA. It is called second level lun ID (SLLID).
None of the VIC adapters seem to support this feature with the drivers I have. I checked the release notes and found nothing.
Is there a target date when this feature will be added to the VIC drivers? I assume that it will be added considering the large number of customers running vmware on UCS (Flexpod, Vblock, Smartstack).
Vmware KB on the issue.
Output from my UCS that shows there are no capabilities listed.
[root@ssc-rcn-esxi-101:/var/log] esxcli storage core adapter list
HBA Name Driver Link State UID Capabilities Description
-------- ------ ---------- ------------------------------------ ------------ ----------------------------------------------------------
vmhba0 mptsas link-n/a sas.51cdf0ffbeefe000 (0000:01:00.0) LSI Logic / Symbios Logic LSI1064E
vmhba1 fnic link-up fc.20000025b5201000:20000025b5201a01 (0000:10:00.0) Cisco Systems Inc Cisco VIC FCoE HBA Driver
vmhba2 fnic link-up fc.20000025b5201000:20000025b5201b01 (0000:11:00.0) Cisco Systems Inc Cisco VIC FCoE HBA Driver
11-20-2015 05:04 AM
Hi Kris,
I helped you about a month ago on this ticket but I just wanted to go ahead and post the answer here for other members of the support forum incase they get stuck on this situation. Below is the summary of the ticket we had open and I made a nice little guide over VVOL for anyone interested.
Introduction
VMware just released a new feature called VMware Virtual Volumes (VVOL) (available in VSphere/VCenter 6.0). This document will help you and the customer understand what it is and how it is supported within UCS. VVol is highly dependent on storage and not so much on compute. So at first we needed to verify if the storage vendor supports it.
Problem Description
Customers have been trying to connect to the VVOL but have not been able to. It turns out that there needs to be an additional capability present on the HBA. It is called second level lun ID (SLLID). This Article will go through how to check if their VIC adapters have this feature available and how to enable it.
Solution
Release notes for the VIC adapters at the moment have no documentation over SSLID and if they support it or not. We have reached out to the alias to add this documentation to the release notes since a large number of customers are running VMware on UCS (Flexpod, Vblock, Smartstack). VMware has a KB on this issue located below;
This article gives you a command “esxcli storage core adapter list” which will verify if your adapter has the capability of Second Level Lun ID.
VVOL support is not dependent on a particular compute platform, one of the driver features needed by VVOL is. This results in Cisco having only 4 HBA / CNA adapters that can support VVOL. Based on the VMware compatibility guide (link is also below) it is shown that these are only supported by Cisco 1GigE I350 LOM, UCS VIC P81E, VICm81KR, and VIC-1285 adapters. What was odd are these are all old adapters.
However, The VIC 1340 (in the guise of the MLOM in the b200-M4) shows support for the Second Level Lun ID feature. They just aren’t on the VMware list. This implies that all vics that use the fnic driver will have that support, though this requires more testing. What it boils down to is that our drivers support the feature, but VMware’s HCL is not up to date on that fact. We are in the process of helping them get the HCL updated.
11-20-2015 06:13 AM
Thanks Qiese,
The support of SLLID on the VICs is for iSCSI only or is Fiber Channel supported as well?
01-07-2016 07:04 PM
An Enhancement for FC has been submitted. I will keep you up to date on that.
01-08-2016 08:05 AM
Can we get some additional details regarding this?
If not can you post the update here when it happens?
Thanks,
Jared
08-19-2016 08:01 AM
I have been trying to get them to include support for SLLID for over a year. There is a bug/enhancement you can track CSCux64473. I would also suggest opening a TAC case referencing that bug so that Cisco knows how many people would like this feature.
10-26-2016 09:13 AM
Any word on the enhancement request?
I would love to be able to implement VVols, but I can't until the SLLID support is included in the firmware.
10-26-2016 09:33 AM
Cisco did contact me and said would be early next year. No details on server or hba models were given. I also heard from our rep, that if needed soon an RPQ would need to be opened with your account team if you need it sooner.
I would like to implement VVols too, but I also want the feature working properly before it gets released.
02-09-2017 07:31 AM
How is it that there is nothing new under the sun about this issue? I have searched extensively and cannot find a new word one about this issue. VMware has released 6.5 already and Nimble is at least 4-5 revisions from their
When can we expect official support for
02-20-2017 01:31 PM
VVol support should be coming in 3.1.3 release of UCSM.
-Wes
12-29-2015 03:30 PM
I have this exact same issue currently.
I have a B200-M4 with VIC1340 that shows secondary lun ID capable but still do not see the PE.
I also tried on a B230-M2 with M81KR with newer drivers that should have the new capability and do not.
vmkload_mod module information
input file: /usr/lib/vmware/vmkmod/fnic
Version: Version 1.6.0.17a, Build: 1331820, Interface: 9.2 Built on: May 13 2015
I found one issue with the SMS keystore where the key was expired, I recreated it, verified, and still no PE and VASA shows disconnected.
Getting frustrated that I am reading so many users are able to use this needed feature on HP branded servers and Cisco is a no go...at least so it appears.
Any help would be greatly appreciated.
12-29-2015 11:18 PM
Please add this VVOL feature in the Interop matrix
http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/b_hcl_B_rel2-26.pdf
Urgent request for PM !
12-30-2015 09:47 AM
Thanks for the link, it appears that I am running firmware 4.1 where I need to be running 4.8...now I need to figure out where that firmware version exists for downloads...
Wishing there was another column that would tell you the earliest release of that firmware version for the adapter...
12-31-2015 09:23 AM
I followed the document and I had to go to version 2.2.6e to get the 4.8 firmware.
Intersting point is:
- ESX 6.0 U1 VMware Release on old 2.2.3d firmware
* Shows the capabilities I need, but no PE available
* Confirmed I was running an old NIC driver
- ESX 6.0 U1 Cisco Custom on 2.2.6e firmware
* No secondary capabilities...thus no PE available
I'm at a lost at this point, as far as I know it should be working but is not.
01-02-2016 08:17 AM
I understand the frustration here. I created a new bug for this to have more documentation in regards to VVOL support within UCS on which adapters and more importantly for them to upload that in the release notes.
I have also reached out to our technical writers to see if I can gather more information for you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide