Unified Computing System Discussions

F1259 Equipment Missing on Cisco 220 M4S

We use monitoring Cisco Rack Server with System Center Operations Manager 2012 R2. We received error messages at the System Center Operations Manager 2012 R2. Error Message is "F1259 Equipment Missing" on the Cisco C220 M4S. What should i do in th...

Resolved! Not able to ping Server

Hi, Unable to ping backup server public ip from VM which is hosted on A chasis but able ping backup server ip from VM which hosted on chasis B Backup server hosted on different infra A and B Chasis are behind different FI and all VLAN passed through...

Resolved! Cannot boot from SSD drive on UCS UCSC-C240-M4S host

I have a UCS C240 M4S box with 2 1.8 TB SSD drive. CIMC firmware version is C240M4.2.0.13d.0.0812161132 CIMC storage controller is Cisco 12G Modular SAS Pass-through Controller UCSC-PSAS12GHBA (1.58-0) I have configured boot order 1. virtual med...

Converged Adapter configuration

Hi Guys I am new in Data Center technologies . An assignment is given to me about Unified Computing and I stuck at converged network adapter configuration . I want to know if we have 250 VMs on a Blade server how we manage bandwidth on each VNIC ag...

UCS C220 M3 - No Hardisk Found After Replacing the Chassis/Motherboard

Hello Community, We have issue on our new replacement unit which is not detecting the Hard Disks after the replacement. We installed the Hard disks on same location/position on the replacement unit. I got this error messages during boot up. After ...

bind vmfex interfaces to exact fabric

Is it correct way to bind interface of virtual machine to exact fabric? First, I created dynamic connection policy: Then I used this policy to create virtual machine adapter template: And finaly I created this adapter in virtual switch: Is thi...

Resolved! UCSC B-2400 M4 CMIC question

Hello, This is a newbie question regarding CMIC on UCSC B-2400 M4. I have configured Outband IP on CMIC on a server using UCS GUI. If i reinstall the OS on Server , does the Outband IP reset itself ?

c-series or b-series

I have a device connect to e2/3, from UCS cli, how would I know whether this is B-series server or c-series server? how would i know this device support ethernet or FCOE, if the port mode is vntag, can i say it support FCOE?

cisco ucs chasis

I associate a service profile template to the chasis, is it enough to pre-provision the cisco ucs chasis?

UCS - Virtual Media Mapping Issue - NFS , WWW(HTTP)

Hi All, I tried to map virtual media on UCS using NFS i got the below error in the logs . As recommended we tried the green button please see the screen shot attached I checked in the CIMC logs below is the error ncutil.c:105:[ncPing]libnc: n...

UCS support of VMware Virtual Volumes (VVOL) - HBA driver update?

Hi guys, I finally got a chance to try and play with Vmware Virtual Volumes (VVOL) today (available in vsphere/vcenter 6.0) and discovered that the UCS doesn't seem to support it.I have a Nimble storage array (think SmartStack) that is running the ...

stuck mac address

This has me stumped. 6248UP FIs, 5108 chassis with 3 B200M4 blades running recent ESXi, 3.1(1g) firmware thruout. One of the blades has mac stuck on at least one of the mgmt vnics. The stuck mac is a valid one in the pool, and was assigned at one po...

Resolved! FI Migration from 6100 to 6200 procedure

Have a customer that is thinking of upgrading their Fabric Interconnect from a 6100 to 6200 or 6300. Concern is that we are looking for a step process to do the migration and to move the database from one to the other. Does this document exist? Thank...

fabric to N5K connection's best practice

Hi Guys , We are about to create a new environment, and we want to do it in the best way. I know there are mainly two options for FI to Nexus 5K connections - let's call it "cross" and "straight" What is a "newer" topology ? And which benefit do i...