Uplink port VLAN

[a.giorgi]

Hi there:

I'm lost

I know when you have for example two uplink ports that belong at the same vlan, and two or more vNICs asociated at this vlans, pinning happen dinamically

I know how configure a VLAN and assign it to an vNIC

But I can't found how to associate the uplink port to this VLAN in UCS manager

Can anybody help me please

Thank you in advance

Al

[abbharga · Accepted solution]

Al,

In the end-host mode for the ethernet, once you define the vlan in the UCSM the vlan is automatically assgined / configured on all the uplink and the server ports.

Here is a chapter from the config guide:

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/UCSM_GUI_Configuration_Guide_2_0_chapter15.html

However starting with version 2.0 there is a feature under which you can control or confiure different vlans on different uplink ports. This feature is L2-disjoint feature and here is a URL to configure it:

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/UCSM_GUI_Configuration_Guide_2_0_chapter21.html

Hope this helps!

./Abhinav

[a.giorgi]

It help a lot!!

Thank you very much!!

Cheers

Al