Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey everyone,I am having issues with my Netflow creating records and exporting it to our Analyzer. Connections have been verified and i did a PCAP on the server itself and it is receiving cflow protocol packets. I am running a C9200-48p on IOS 17.03....
Hello all,I have a plan to upgrade our secondary core switch stack from C9200 48 Port on version 17.3.5 to a C9300 with yet to be upgrade OS. The only question i have at the moment came from an issue i encountered when upgrading to ten gig network mo...
Hey everyone, i have an issue with trying to tftp a file to a switch i have. i have tried direct ethernet connection to the switch, with spanning tree and with out with just an access port. switch was unable to ping PC directly connect but pc could ...
Hello all, first thing first, i have checked everything possible with its physical connections except changing it to a different location and testing.So i have a 7841 IP Phone connected to a C9200-48P. I have enabled on the phones interface "log even...
Hello all,This is an issue that had me stumped for quiet a while but thankfully i had the help of a CCIE with tons of experience. So i will briefly describe my issue, how we narrowed it down, and so forth.Prior changes made: switch upgrade for one of...
Hello @Giuseppe Larosa ,That is my main concern in this scenario:XB_ALLIN1#show flow mon e-1 statCache type: Normal (Platform cache)Cache size: 10000Current entries: 0Flows added: 0Flows aged: 0XB_ALLIN1#show flow mon e-2 statCache type: Normal (Plat...
Thanks for checking on that @Giuseppe Larosa . I doubted the error was the configuration side of things. I just wanted to drop my concerns into the community thread to try and help verify that with some knowledgeable people. I have started sorting th...
Hey @David Ruess ,1. This was intentional yes. Their support team asked me to change the record to a default template so i chose app-stats-in/output.2.Correct our appliance has full visibility to the switch via SNMP and VTY ACL's configured for acces...
Another thing that may be useful the interfaces are using commands like:interface GigabitEthernet1/0/32description OPACswitchport access vlan 136switchport mode accessip flow monitor e-1 inputip flow monitor e-2 outputend