Hello all, newbie to configuring Voice Gateways. I've received a batch of VG420s. The first one I configured, brought online, programmed analog ports on, the ip http server was disabled. "no ip http server"The next 2 I did, I noticed it was enable...
Brand new VG410 48FXS. Performed a write erase then reload and now no longer shows:redundancymode nonevoice-port 0/1/0!!voice-port 0/1/48And it does not take any "voice" related commands.I'd prefer to restore the factory image, but every time I do a...
Hi there, what would be the best case usage for this feature? Or shall I ask it this way, can this be used for disaster recovery/failover for outbound calls.1st entry Local Route Group Settings is our on-prem PRI's2nd entry Local Route Group Setting...
Trying to grab the logs from Jabber on iPhone, using Settings> Problem Reporting> enable Detailed Logging> Send via email. But I never receive the emails. I've tried sending to my company email, to a personal email, etc. Is it Jabber sending th...
Thank you all for your feedback. Since the majority of the VGs I've worked on in the past had this feature disabled, I'll go ahead and follow Elliot's advice and just add a line to say "no ip http server" in my config template.
JamesHawkins....I noticed the factory image after a write erase does not add your technology license. You'll need to re-add "license boot level uck9". Try that and let me know how far you get. There was all that IOX/Event Manager stuff that got re...
Good day Gregory and thank you for your reply.Your first step to reinstall vdsp is where I am hung up. Use the following commands to check and reinstall the vDSP container: show voice dsp group all If the DSP state is not UP, reinstall the vDSP c...
Thank you patcummins for you reply....I believe item 1 is really what is the issue. It seems when the WiFi on campus is weak, then the APNS wants to use cellular, but then if cellular is also weak, the APNS gets lost in transit. I have seen that CU...
