Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All
facing following issue
call flow
Call leg 1: PSTN - MGCP- CUCM - Call Transfer Call Leg 2: CUCM - MGCP Gateway - PSTN
as per the incoming calling party setting cucm adds prefix 91 to the original calling number at the fist call leg however the...
Hi Guys,
I have a user his jabber client shows offline even he is logged in (also he is not able to modify the status) however his status shows correctly to the other users.
Any idea what is the issue?
Status on user's jabber client
the oth...
Hi All, I got an old cisco WLC 2106 I would like to try to get running. It seems RAM memory has been removed.Any ideas what is the right memory, is there any cheap replacement?Thanks
Hi All,Please can anyone advise what can be the cause the Cisco CallManager services restart spontaneously?We are running cucm version 7.0.2. Yesterday we noticed the Cisco CallManager services stopped on the puplisher, so we restarted the services. ...
Hi Alyza,thank you for your respond, I've wanted to send you an email but it returned as Undeliverable: ...the address may only accept email from certain senders, or another restriction may be preventing delivery....I tried company and personal email...
Hi,probably you are right, that it is a boot problem, because when I left the switch powered on after about an hour or two later the amber leds went green, it booted up and looked fine. I formatted flash and put a new IOS some days ago (the old IOS w...
It looks like total POST failure; I can’t get anything on the console. The leds go amber immediately after the switch is plug on and I can’t get to ROMMON.
