Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I am following Jeremy Cioras lab on BGP for the CCNP Route. BGP remians IDLE.What am I missing?I have two new Just Started 7200 routers, connected to se1/0 on both with a serial connection.R1: 10.1.1.1 255.255.0.0 AS 6500R2: 10.2.1.1 255.25...
Hello,Quickie....New temporary site 1 mile away from main site connected to MPLS.We want to connect new site with a 10M ethernet connection to existing site.Can i just throw a L2 switch in the new site (extend the LAN)?We have a flat topology. Or doe...
Hello,Currently have two routers inside our network. One is the default GW 10.1.1.13One is Jump Router for ATT 10.1.1.12Both connected to HP Procurve L2 switchThe ATT Router is 10.1.1.2Want to replace GW and Jump with one 3750 L3 switch.Can I accompl...
OK,Here is the quick rundaown...Our public wifi circut (verizon wireless) was upgraded from 25M to 150M due to over 500 devices connected and fighting for bandwidth.I noticed when runnung tests that when associated to th 3502 AP's Im getting around 9...
Hello,As I understand form a TAC case for enabling Jumbo frames on my N5K is :switch(config)# policy-map type network-qos jumboswitch(config-pmap-nq)# class type network-qos class-defaultswitch(config-pmap-c-nq)# mtu 9216switch(config-pmap-c-nq)# exi...
No LAN QoS1GB ports on both.I took the 3502 down from the cieling and replaced it with a 3602 and bandwidth was 35M. put the 3502 back up and it went back to 9.7M
Vz circuit to a 2921 router vlan to 6513 switch to WLC5508 and AP's coming off the 6513.The ssid is using a captive portal server, QOS is bronze.Duplicate everything but different AP seem to give out different bandwidth.3602 - 35M3502 - 9.7M
7.2.103.0this is the answer i got from TAC:You are potentially hitting the bug CSCty48638 on your controller. There is no work around for this bug but it will be fixed in 7.3 code.Symptom:Controller message log is fixed filled with %DATAPLANE-3-DP_MS...
