Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been tasked to find a way to give the call center agent (end user) the ability to decide which phone is assigned in rmuser (cucm application user for uccx). The goal is for them to be able to move between their home office and work office with...
Our company uses WebEX extensively, and with that comes the high operational cost of toll-free and long distance call charges. 90% of our WebEX calls are solely internal users joining, but as WebEX no longer does on-prem solutions, we are unable to m...
In our biggest building we have 44 * 3560E-48 switches (avg 90% port utilization) connecting to a pair of 5548's (no vPC set up), on top of that we have several other buildings connecting to these 5548's (in total traffic of another 43 access switche...
We are getting 4k series routers in our branches, but we would like to have some redundancy. First we were looking at 1x 4451. But just 3 days ago we had one of our routers (3800 model) break after a reload during maintenance, and due to weather and ...
We have 1 Pub CUCM and 3 Sub CUCM server and 2 TFTP servers in the cluster. We are currently using self signed certificates, but management wants us to move to certificates signed by our Root CA.The CUCM version we are running is 9.1.2.12900-11.
So f...
Our company uses port 8001, so they cant use jabber and the program together. CUCM 10.5 on prem, Jabber for Windows 11.6.3.
Not a lot of employees use this program, so it is not as bad, but they are planning on expanding the use of this software, so...
We are having a very similar issue right now with the same firmware version and IOS version. But it only rears its head when we have an IP phone (7942 and 7962) between the PC and the switchport. Are there any solutions to this yet?
95% of our end-user connections would be 100 Mbps lines due to our Cisco phones, but the regular load is nowhere near reaching that except for some of our developers and DBA's. What would you say is a a more modern design recommendation for access an...
Shaunak,
Sorry for the late reply. We would have a number of ACL's on these devices, and QoS will be mainly respecting the existing tags. We will also not use any deep packet inspection on the distribution switches.
Thank you again for the great inf...
Thanks for the information. What other factors should I look at? I know the internal switching maximum is an important factor, but with Layer 3 switching I am not sure what else comes into play.
