Hi ,
we currently have 5 Service provider PRI voice circuits that terminate in the voice gateway . All these circuitsare for the Cisco Call Manager in one of the site. we’re looking at reducing the number of PRI’s to 3.Can I shutdown last two ?
for ...
How do we export the current cucm configuration(includign gateway,phone,UDP etc) for all the region in cluster
or do we have to export seperately phone, gateway etc.
Vg224 status unknow on cucm this gateway contains ports for fax.
>not able to ping to vg224 other vg224 are pingable.Main gateway is h.323 which is working fine
How to troubleshoot the VG224 why its not reachable ?
SNMP Response failing alarm were trigger
>>No SNMP data is being reported from A-subpub01.abc.com Check that the snmp community has not been changed, either on the device or moniting tool
If the SNMP credentials are correct, check that a firewall i...
As other team is filtering BGP prefixes and need to work on the conflicts ip.
And can we route A- website subnet over the Internet instead of using MPLS ???
If yes then how can we route this over the internet instead of MPLS
Hi Chris,
Now the network team are playing to change the ip .
So that are the thing we have to considered.
And how can I route the all the call to other region i.e B cluster as we will shutdown one side cluster of region A.
Hi Chris,
As in one of the cluster - A(at US) SRST is configured for the local site.
Can we configure the SRST or route all the call to other cluster - B(at UK)