Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
Can you share articles or you can explain so, what a difference about Webex Calling Multi Platform and Webex Calling Dedicated Instance . I need table comparison (pros and cons)
Respectfully,
SH
Hi All,
I have bought a webex calling professional license. and manage some users with ext (but I haven't integrated it with PSTN yet)
I tried to call one of the users with the ext but it didn't connect. Is there a configuration that I haven't done ...
Hi Buddy,
I have a case about cisco cube can't connect to CSSM , actually that device already config , below this :
ip name-server x.x.x.x x.x.x.xip http client source-interface GigabitEthernet0/0/0license smart transport smartlicense smart proxy ad...
Hi,
i have a cube which will connect to ITSP with Public IP . Do I have to configure SIP-UA first?because I debug ccsip message when making incoming call but debug doesn't enter CUBE (Term Monitor already)Topology :
CUCM-> SIPTrunk -> CUBE -> ITSP ...
Hi Guys, I have case about CUBE incoming call plar to Auto Attendant (Cisco Unity) , call busy if I do plar to AA but call connected if I do plar incoming to Ext Phone Maybe I will explain my case : SIP Trunk PSTN Number -> Translate to 5030 (AA/CTI...
Hi ,
Please share error log , or write that log in forum Potensial Upgrade Fail :
Network unstable Firmware version difference too Long , i mean you need intermediate upgrade , example you want do an upgrade to version 11 from version 8 . You must u...
Hi Roger,
Many thanks for respond , but before i am apply your suggest config , in and outgoing with my VG running properlly , dan sound hear from both (calling and called) then i just receieved information now , suddenly Sip-Ua not register again , ...
Ok , now sip-ua registered . Thanks But when i test incoming the result no match outgoing dial peer +6221303022xx I do debug ccsip message , error appear 404 not found (no macthing outgoing dial peer)
let say , i do call from my mobile phone dialed ...
Hi , This is result from debug CCSIP Message Incoming Call
id-tangg-vrtr-01#*Sep 6 06:37:51.873: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:OPTIONS sip:IP ADD VG:5060 SIP/2.0Via: SIP/2.0/TCP IP ADD CUCM:5060;branch=z9hG4bK3e5bc2171d9d54Fro...
Hi Roger,
Thanks for reply, i hope you can help me
This my config VG
Version IOS -> 17.06.02
voice service voipip address trusted listipv4 IP Add CUCMipv4 IP Add VGipv4 IP Add ITSPmode border-elementallow-connections h323 to h323allow-connection...
