About b_ferguson

b_ferguson · 02-21-2024

Does anyone know if this feature has been released yet? Looking at this getting with working with a quadcam and PTZ. Currently the PTZ is just focused on the presenter. Any info would be appreciated. Thanks!

b_ferguson · 12-20-2023

Long shot here but figured I'd ask..... We have a conference setup with a room kit eq on one wall and board 75 on the opposite wall configured in companion mode. we would like to use an external camera on the board side, currently it's connected t...

b_ferguson · 01-04-2023

WLC9800... I have a SSID with CWA with ISE working just fine and another SSID using MAB. Customer wanted to collapse these SSIDs into a single one and use MAB first, if that fails then redirect to the CWA portal. Since the authentication piece is ...

b_ferguson · 11-21-2022

CUBE configured with dial-peer pointing to IVR system, calls originating from outside users that don't have the same carrier as the provider for this SIP trunk work just fine and their payload is showing as 101. only calls originating from the same ...

b_ferguson · 09-24-2021

cisco codec pro, have a screen in the front of the room and a screen in the back. Is there a way with a ui extension / macro to change the source so if the user wants to change the source, they can? i've only seen a way to change it within the code...

Re: SIP Profile Test Tool · 12-20-2023

is there another tool others are using or just live testing in an environment? I searched and searched and can't seem to find anything, figured I'd ask.

b_ferguson · 08-30-2023

Were you ever able to resolve this issue?

b_ferguson · 01-20-2023

The solution for this scenario was to add "security web-auth on-macfilter-failure" under the wlan as even if the device was in the MAB group in ISE, they were still getting redirected to the web-auth page which was not the desired behavior. Once tha...

b_ferguson · 01-09-2023

I think I'm following this now. I'm going to test this out later this week and I'll respond back after that. thanks for passing along these links.

b_ferguson · 01-06-2023

thanks for the response balaji, I'm not seeing authentication profile order on those links. I see the multiple authentication methods but the customer doesn't want both, if certain users are in a MAB group when they connect to this single SSID, they...

Member Since	‎08-10-2006 05:22 AM
Date Last Visited	‎09-17-2024 02:33 AM
Posts	175
Total Helpful Votes Received	15

User Statistics

User Activity

Webex configuring cinamatic meetings

Cameras in Companion mode / Room kit EQ with Board75 w/camera

WLC9800 multiple auth using MAB first and then CWA

CUBE DTMF payload 110

cisco codec pro change monitor roles / macros

Re: SIP Profile Test Tool

Re: Far End Camera Control Webex App - Icon not showing

Re: WLC9800 multiple auth using MAB first and then CWA

Re: WLC9800 multiple auth using MAB first and then CWA

Re: WLC9800 multiple auth using MAB first and then CWA