Mark Bracking

Mark Bracking · 04-12-2016

Configure DHCP option 81 FQDN Can you explain this section further? Say you want to add your router ...

Mark Bracking · 01-12-2016

You will need to purchase a EHWIC or HWIC for your 2911this well give you a second port for bada . M...

Mark Bracking · 01-06-2016

Little surprised that only one person provided any feedback. So how I to solved this was to use the ...

Mark Bracking · 01-06-2016

Rajasekar A, The problem is how to add bada lan ip in the router. (I think you mean WAN & LAN for Ba...

Mark Bracking · 01-05-2016

Hi rsa000701, Not sure how long you have been on this forum but, how it general works is the more in...

Mark Bracking · 12-30-2015

Ok so I have my router set up and it is giving out ip address to LAN clients but not WLAN clients I ...

Mark Bracking · 12-22-2015

Manjil & Scott Pardon my intrusion, but you are talking about the same issue I am having. I have a c...

Mark Bracking · 12-22-2015

Here is a basic template for configuring cisco routers so I can access with CCP, CCPExpress, SDM, et...

Mark Bracking · 12-22-2015

You can accomplish that by using one of these methods 1) IOS NAT Load-Balancing from Two ISP Connect...

Mark Bracking · 12-22-2015

The problem was the wrong MAC address was assigned to the static IP Address at the ISP sides. Once t...

Mark Bracking · 09-28-2015

If you have Cisco Configurations Professional set up you can use CCP to activate the image you want ...

Mark Bracking · 09-27-2015

The SF / SG line of switches I believe all use a built in browser application to manage or configure...

Mark Bracking · 09-27-2015

I just did the same thing with my Cisco 881G-K9-3G router after I had completed the configuration I ...

Mark Bracking · 09-27-2015

You can buy them on Amazon I bought a second SG200-18 that did not come rack mount kit so anyway I b...

Mark Bracking · 09-22-2015

Equipment:Cisco Router 881G IOS 15.4(1) using Static IP Address from ISPProblem:DNS is not resolving...