Hi all,I have an unity connection system with multiple forwarded routing rules, I receive warnings for all of my forwarding rules stating that they have one or more conditions and that I should reconfigure them if necessary.. They all have the condit...
Hi All,I have a Cisco 2911 with an EVM-HD-8FXS/DID card. The card was recognized at the first boot and I was able to see the voice-ports etc.. After a reboot the card isn't recognized anymore and I have the following messages in the logging:*Jan 20 1...
Hi all,A customer has a UC540 with voicemail configured on the CUE. When calling internal to the "main" phone with the call forward noan to the voicemail is working perfectly, the message is played and people can leave a message.When an external call...
Hi all,For one of my customers I had to implement a Unity Connection Call handler with a schedule for working and non working hours. All is working well but since I have activated the Call Handler they have a different Dial Tone for incoming calls..T...
Hi all,I'm setting up a Cube for my customer and i'm running into problems with incoming calls. Outgoing calls are working fine, my SIP trunks get registered but when I try to make an incoming call it just won't work.When I do a debug ccsip message I...
Hello,I've been testing some things but wasn't able to find a solution yet.I've removed the secondary number of my ephone-dn, and registered it under a dial-peer mapped to a voice-port 0/0/0 -> at the voice port i've added the connection plar 500 com...
