Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
using expression editor trying to do something like this: {sString = "\"[parameter]\":\"[value]\"";}hoping to have sString equal this: "[parameter]":"[value]"it appears to not be recognizing the \ as an escape character. any thought?
Numbers are configured as speed dials.Using ExtMobility on 7942.Login user to alternat phone (7965 or 7940) will allow AbbrDial.Is there some setting on a phone that would not allow AbbrDial? multiple users with same udp setup on 7942's work fine. Ha...
have other devices that are working just fine. but can't figure why this one will log user in, but only at privilege 1 - requires enable password. other devices will allow login directly to privilege 15. the only thing i can see is the 'enable secret...
In the successful branch of the select, put a dequeue step, then the connect step. this will allow the failed branch of the connect to process and not jump back to the select step.
ahhh. so both the trigger and the second line is 12701. put the 2nd line in a different partition that can be dialed by CCX and not by normal DNs.the reason the light turns red is that the shared extension is in use - which is bad for CTI ports
