Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to provide locally switched guest wireless access in flexconnect mode with Web-Auth? All of the documentaion examples I can find show guest webauth with central switching. I want a remote office, connected via DMPVN, to provide guest w...
Hello all,I have always used MGCP when configuring my gateways with PRI's. I am looking for some advice on whether to use MGCP or SCCP on 8 VG224s I am installing. I have seen some posts in the forums that SCCP has more features, but I could not find...
I have added a subscriber server to create a cluster and set it up in the CM group as the 2nd server. I have the group defined in the Device Pool and have that device pool assigned to all devices. When I shutdown the publisher to test the failover th...
I currently have a CCM 4.1(3) Publisher and I am trying to add a subscriber. The CCM disks I have are 4.0(2). My intentions were to build the subscriber and then use the web updates like I had done with the existing Publisher, but when I try to insta...
We have a mixed implementation with a traditional Siemens PBX connected to a VG200 MGCP Gateway by QSIG PRI. We have users on both systems in our facility. All calls that are passed from the Siemens to the CCM come up as external calls with the exter...
Have you verified that the changes you made were accepted?
If you type show switch, it will list each member and their role as well as their priority. This would at least confirm it is set correctly.
I believe the recommendation was just to use all of the loopbacks from a /24 network space, such as 10.1.1.0/24 In that case each loopback would be an individual /32.
It would look more like this:
ROUTER A = 10.1.1.1/32ROUTER B = 10.1.1.2/32ROUTER ...
Hello there, I have been unable to acquire my switch license as well. I received a call, but was unable to answer it. I have called back a couple times, but I have not received a response. What are my next options?
I just recently did an upgrade from 8.5(1) to 10.6(1)SU1. The biggest thing that I ran into issues with was the requirement for DNS, including reverse DNS. I had not previously used DNS on the UCCX server. It is required in 10.6. I am not certain if ...
